HPVM 6.5

[berlui]

Hi,

I created a virtual machine with the following command:

hpvmcreate -P test -c 1 -r 1G -a disk:avio_stor::disk:/dev/rdisk/disk5

but, when I start the VM, EFI doesn't see the disk !!!!!

Why?

[berlui]

EFI

----

EFI Boot Maintenance Manager ver 1.10 [14.62]

Add a Boot Option.  Select a Volume


    Load File [EFI Shell [Built-in]]
    Legacy Boot
    Exit

[Eric SAUBIGNAC]

Bonjour,

Before trying to boot, load the EFI shell, then issue drvcfg -s :

Shell> drvcfg -s
Set Configuration Options
  Drv[19]  Ctrl[ALL]  Lang[eng] - Options not set. Status = Invalid Parameter
HP AVIO Stor Driver Configuration
==================================
Warning: Enumerating all SCSI or FC LUNs increases initialization times.

Enumerate all SCSI LUNs (Y/N)? [current setting: N]: N

Enumerate all FC LUNs (Y/N)? [current setting: N]: N

Answer Y to the first question (your disk is connected through AVIO).

Once finished, reconnect -r then map -r and you should see the disk.

Once setboot is done by the HP-UX installation, or manually) you can go back to the initial configuration and answer N to both questions

Eric