1910-24G-PoE (170W) Switch (JE008A) - Acoustic ?

[Polex34]

Good day.
Please help anyone has information.
What level of noise - acoustics in this Switch? 
HP 1910-24G-PoE (170W) Switch (JE008A)

Search descriptions, call the vendor - not helped.

Thank you.

P.S. This thread has been moved from Switches, Hubs, Modems (Legacy ITRC forum) to Web and Unmanaged. -HP Forum Moderator

[SCOOTER]

For some legacy products is avaialble in the "Installations and getting started guide" but not for the 1910.

To my best knowledge, what I have found in some old notes of mine it should be 53.6dB

I have not found anything on the web, if you need an official HP statement I am afraid you will have to call HP support for that

[Polex34]

I'm from Russia, I called in a support HP.
they refer to the documentation or call distributors offer.
The documentation is nothing.
Official sellers look there is nothing to say and can not.

Vicious circle =)

Thanks, at least some data.

[SCOOTER · Accepted solution]

Strange that they refer you to documentation where there is no answer and to distributors. I did some more digging and found the rest of a partial email thread from communications with HP.

The acoustic test will follow ISO7779 and the sound pressure test result is in the below table

Unit                                             Noise dBA

HP 1910-24 Switch              47.0

HP 1910-24-PoE(170W)    53.6

HP 1910-24-PoE(365W)    55.3

Hope this helps

[Polex34]

Thank you, very helpful.