2928 hpwr plus/ v1910-24g-poe firmware for pse

[KD8SGF]

I've recently purchased this switch for our small business.  I checked the firmware version of the components and noticed the PSE firmware is corrupt (see below). I've been digging for the newest firmware version for the past 2 days, but i can only find it for the 1950/5130, and that does not work with the 1910. Any ideas/ luck with getting the firmware out there?

<3com 24G>display poe pse
 PSE ID                           : 1
 PSE Slot No                      : 1
 PSE SubSlot No                   : 0
 PSE Model                        : LSW124POED
 PSE Current Power                : 0        W
 PSE Average Power                : 0        W
 PSE Peak Power                   : 0        W
 PSE Max Power                    : 740      W
 PSE Remaining Guaranteed         : 740      W
 PSE CPLD Version                 : -
 PSE Software Version             : 0
 PSE Hardware Version             : 0
 PSE Legacy Detection             : disabled
 PSE Utilization-threshold        : 80
 PSE PD Disconnect Detect Mode    : AC