Configuring Trunks between HP 1810G & HP2524

[Prash29]

Hi All

I'm trying to create a trunk between the HP1810G 24 port and a HP 2524 Switches.

The HP1810G Switch ahs ther main server connection. So if I connect any devies to the 1810G switch I can get a DHCP address and everything works. When I plug a device in the 2524 I can't get an DCHP address. I've check the logs and can see the port is being block. I've diabled Spanning tree completely.

Can any one help.

Thanks

Prash

P.S. This thread has been moved from Switches, Hubs, Modems (Legacy ITRC forum) to Web and Unmanaged. -HP Forum Moderator

[Shadow13]

how many cable are connected between the 2 switches, also how many vlans are you using ?

And by trunk you mesn link aggregation or trunk for vlans as in cisco ?

[Prash29]

Hi Shadow13.

I'm using 1 cable which plugged in the Gigabit module on the 2524.

I'm not using any VLANS

Regards,

Prash