Web and Unmanaged
cancel
Showing results for 
Search instead for 
Did you mean: 

Poe-power is not ready or communication failed! HPE V1910-24G-PoE (365W) JE007A

 
Highlighted
Occasional Contributor

Poe-power is not ready or communication failed! HPE V1910-24G-PoE (365W) JE007A

<JE007A>display poe pse
 PSE ID                           : 1
 PSE Slot No                      : 1
 PSE SubSlot No                   : 0
 PSE Model                        : LSW124POED
 PSE Current Power                : 0        W
 PSE Average Power                : 0        W
 PSE Peak Power                   : 0        W
 PSE Max Power                    : 740      W
 PSE Remaining Guaranteed         : 740      W
 PSE CPLD Version                 : -
 PSE Software Version             : 0
 PSE Hardware Version             : 0
 PSE Legacy Detection             : disabled
 PSE Utilization-threshold        : 80
 PSE PD Disconnect Detect Mode    : AC

 

it seams the PSE software is not installed. 

where download poe update file

Any idea how to fix it?

Thanks.

4 REPLIES 4
Highlighted
Honored Contributor

Re: Poe-power is not ready or communication failed! HPE V1910-24G-PoE (365W) JE007A

Before commenting anything about PoE firmware what's about telling us something about the JE007A firmware your switch is currently running on?


I'm not an HPE Employee
Kudos and Accepted Solution banner
Highlighted
Occasional Contributor

Re: Poe-power is not ready or communication failed! HPE V1910-24G-PoE (365W) JE007A

running on Current Releases
1910_5.20.R1519P03

thank you

Highlighted
Honored Contributor

Re: Poe-power is not ready or communication failed! HPE V1910-24G-PoE (365W) JE007A

It looks similar to an issue discussed here (same Switch SKU, same issue). Defective PoE?


I'm not an HPE Employee
Kudos and Accepted Solution banner
Highlighted
Occasional Contributor

Re: Poe-power is not ready or communication failed! HPE V1910-24G-PoE (365W) JE007A

yes, it same