color LaserJet 2600n is in wrong language

[Beverly Steinberg]

Somehow I changed the language on the display of the printer. It is now in Czech (I think). I don't know how to restore it back to English. I see that you can restore by going to Service but I'm not sure where that is since it's now in a foreign language. Any hints on how to get it back to English? Thanks!

[Igor Karasik]

I don't sure about 2600n specificaly,
but usually you can login to printer with http, something like
http://
and change language in configure device window.
The second option you have - learn Czech :-)

[Beverly Steinberg]

Thanks but the printer is connected to my Mac so I don't know how to do that. Learning Czech isn't the solution either! But...I found this page from the manual (page 121) that says how to restore the defaults. If you have the printer maybe you can tell me how many times to push the right/left/or green keys to restore as they suggested. Since I don't know the language I'm not sure what I'm pushing. I'm attaching a pdf.

[Igor Karasik]

Ok, see this:
"HP Business Inkjet 2600 Series Printers - How to Change the Language Displayed on the LCD"
http://www1.itrc.hp.com/service/cki/docDisplay.do?docLocale=en_US&docId=200000081264528

Regards, Igor

[Beverly Steinberg]

I appreciate your help. I have a Color LaserJet not an Inkjet. I tried it anyway but it didn't work. Any other ideas?

[Beverly Steinberg]

AHA! It worked with the 2600n Color LaserJet by having the printer on first (shows the foreign language), then hold down the green button and turn it off and then on again while still holding the button.

I'm back to English now!