Posted to: ProLiant Servers (ML,DL,SL)
3 hours ago Hello guys, Maybe it's a stupid question but I find nothing about it.I have a customer with an old gen 9 and 3 disk in raid 5 with a smart array.One disk is in predictive failure and the arrays battery is down.Could I change the disk without shutdown... Posted to: Operating System - Microsoft
4 hours ago What is the latest supported version of Windows Server for an HPE DL360 Gen7? Thanks, Stuart
Posted to: ProLiant Servers (ML,DL,SL)
06-08-2023 HP Gen11 UEFI boot mode with MR408i-o RAID Controller. 3 Logical drives. HP numbers these 239, 238,236 or something similar. The 1st logical drive created always has highest number. Autoyast contains partitioning for 3 logical drives, but installer a... Posted to: ProLiant Servers (ML,DL,SL)
09-08-2023 Hello!I have this message from SSA cli: "Warning: Unrecoverable Media Errors Detected on Drives during previous Rebuild or Background Surface Analysis (ARM) scan. Errors will be fixed automatically when the sector(s) are overwritten. Backup and Resto... Posted to: HPE Synergy
02-21-2024 Hey team, facing quite a strange problem. We are trying to reimage a Composer 2 with version 6.60.04.Everthing goes well until one point where we get the message "Could Not Validate the HP Signature Because the HP Public Key Could Not Be Imported". W... Posted to: ProLiant Servers (ML,DL,SL)
06-10-2020 Hello,i cannot boot into logical drive due to earlier hard drive failure.i have a RAID 0 of 4 physical hard disks, one of my hard disks has failed ( server froze but one of the hard disk led was amber ), i restarted the server and when it back up the... Posted to: ProLiant Servers (ML,DL,SL)
Saturday Has anyone had any luck using storcli.efi on a Proliant?I have DL325 and DL345 Gen 11's with MegaRaid (MR) raid cards.Apologies if I am using the wrong forum.Searches for storcli.efi turned up nothing. Posted to: ProLiant Servers (ML,DL,SL)
10 hours ago Hi,I just wanted to know if somebody know what is what is virtual media throughput on ILO 5 ? I copied some files from an .ISO image to a system a windows server system and get troughput on average bettwewn 1.50 MB's up 2.00 MB's when I look at file... Posted to: Server Management - Remote Server Management
yesterday Wondering if there is a way to access the remote console of a DL-380 G9 server to allow OS install from local USB drive?I don't want to pay to license remote access. This should be a standard free feature for the server.Are there othere server brands... Posted to: ProLiant Servers (ML,DL,SL)
2 weeks ago Hello,I have a connection via connect-hpebios on a gen10 plus server, and whenever i try to get or set any info i get the following xml errors below. Is this a known issue for Gen10 plus servers?Get-HPEBIOSBootMode : Failed for 10.10.16.108: XmlNode...
