ProLiant Servers - Netservers
1752576 Members
4609 Online
108788 Solutions
New Discussion

Fastest processor (most cores) for HP Gen8 Microserver (model 819185-421)

 
SOLVED
Go to solution
Daniel123
Occasional Visitor

Fastest processor (most cores) for HP Gen8 Microserver (model 819185-421)

What is the fastest processor (actually the processor with the most amount of cores) that I can put into an HP Gen8 MicroServer (model 819185-421)?

5 REPLIES 5
Kashyap02
HPE Pro
Solution

Re: Fastest processor (most cores) for HP Gen8 Microserver (model 819185-421)

this server is compatible with below processors.

Processor
Intel® Celeron® G1610T (2.3Hz/2-core/2MB/35W) Processor
Intel® Pentium® G2020T (2.5GHz/2-core/3MB/35W) Processor


NOTE: Intel® Celeron® G1610T and Intel® Pentium® G2020T support up to 1333MHz DDR3 memory speed.


Intel® Core™ i3-3240 (3.4GHz/2-core/3MB/65W) Processor


NOTE:Intel® Core® i3-3240 support up to 1600MHz DDR3 memory speed.


Intel® Xeon® E3-1220Lv2 (2.3GHz/2-core/3MB/17W) Processor


NOTE: Intel® Xeon® E3-1220Lv2 supports up to 1600MHz DDR3 memory speeds

Make sure to verify the DIMM speeds before changing the processor.

All these processors are of 2 cores. I suggest you to use any one of these processors as these are tested on this server.

Reference: https://h20195.www2.hpe.com/v2/getdocument.aspx?docname=c04123182#

I am a HPE Employee.
[Any personal opinions expressed are mine, and not official statements on behalf of Hewlett Packard Enterprise]

Accept or Kudo

MartinRoenitz
Occasional Visitor

Re: Fastest processor (most cores) for HP Gen8 Microserver (model 819185-421)

I have an Intel(R) Core(TM) i5-3470T CPU @ 2.90GHz installed in this server and it works wonderfully.

BunnyPon
Advisor

Re: Fastest processor (most cores) for HP Gen8 Microserver (model 819185-421)

A bit of a zombie thread. I have 2 microservers now running these:

[ 0.137289] smpboot: CPU0: Intel(R) Xeon(R) CPU E3-1280 V2 @ 3.60GHz (family: 0x6, model: 0x3a, stepping: 0x9)

Origintally they came with the i3 and the 65W heatsink. Since they never get their cores pegged, there have been no problems related to heat this year. (ambient 34'c at time!)

I can't Cat Today.
touliloup
Visitor

Re: Fastest processor (most cores) for HP Gen8 Microserver (model 819185-421)

You can check here for a full list:
https://n40l.fandom.com/wiki/Cpu_gen8

A good option to stay at 45W is the Xeon E3-1265L V2
You can find it for around 50$ from china on ali or ebay.
Anything more powerful and you would need to change cooling.
The HP heat sink for cpu up to 65W had ref: 832667-001
BunnyPon
Advisor

Re: Fastest processor (most cores) for HP Gen8 Microserver (model 819185-421)

All 3 of my microservers came with the i3 / 65W heatsink. Even thrashing it with the 1280 was not a problem. 

2 of them have been retired since I added a TM200 (which isn't upgradable but has 8c) and a mysterious ML30 Gen10 board that isn't.

I can't Cat Today.