NO DISPLAY TO CONNECTED MONITOR THROUGH VGS

[Samil]

I am using an HPE ProLiant DL380 Gen10 running Ms Windows Server 2019 and I did not have any problem.

However, about a month ago, the server has become problematic. It is connected with a monitor through VGA but it suddenly stopped displaying. I tried checking for display driver and OS  updates but all in vain.

I have searched for a solution from a very source I could land on but still stuck. 

I can only use it trhough remote desktop and any desk. 

Can I expect any help from here??

[support_s]

System recommended content:

1. Advisory: HPE ProLiant e910 Server Blade - External Monitor Will Not Wake From Sleep Mode When A Display Port (DP)-HDMI Adapter Cable Is Connected To The External Monitor On An HPE ProLiant e910 Server Blade Running Red Hat Enterprise Linux

Please click on "Thumbs Up/Kudo" icon to give a "Kudo".

Thank you for being a HPE valuable community member.

[Samil]

Hi, Thanks for your support and feedback. However, for my case these solutions do these solutions do not seem to apply for the reasons;

1. I am not using HPE ProLiant e910 server blade nor  am I running Linux 7 or Red Hat Enterprise Linux 8 or any linux whatsoever. I"m running MS Windows 2019 on  an HPE ProLiant DL380 Gen10 server.

2. For my case on the HPE ProLiant DL380 Gen10  that I have does not support a Display Port (DP) connection and ILO is not configured. I don't have enough knowledge to configure it.

It only supports one VGA  port that I have been using for a while until it suddenly stopped.

[Suman_1978]

Hi,

If there is no display through VGA port even during POST or BIOS, the display port or cable could be bad.

Thank You!
I work with HPE but opinions expressed here are mine.
Recent Support Video Releases