HPE ProLiant
Have questions about ProLiant servers installation, usage, maintenance, and upgrades? Find answers and share knowledge in this HPE community forum.
1754294 Members
3273 Online
108813 Solutions
New Discussion

Join the conversation with experts and colleagues

Posted to:
Original author:
First of all, I do not know how serious or business-oriented the forum is, my first topic and my first post, so if I make any bad wording or make a mistake, I apologize in advance. My question is as in the title, I wanted to use the tpm header to eas...
Posted to:
Original author:
Hi all.. New here.. So we have a handful of the above servers they all have the TESLA t4 cards in them (2) the Fans stay at around 52% and the server is very loud.. If i take the cards out the server is perfect... I have updated the ILO and BIOS to t...
Posted to:
Original author:
Hello everyone, I am trying to install Agentless Management Service on a DL20 gen10 plus server, in order to decrease fan speed. The customer used the following command: sudo apt install hp-health hponcfg amsd ams ssacli ssaducli ssa found in the fol...
Posted to:
Original author:
This is a DL380 gen 10. I need to expand the logical drive /array. The server was originaly built with 2 Arrays. Array 1 - 3 600GB SAS drives (RAID 1 with spare) for the OS (Disks are in bays 6-8) Array 2 - 13 2TB SATA drives for Data in a RAID 5 wit...
Posted to:
Original author:
Hi Team. My Current ILO version is ILO 5 2.31 and I want to upgrade it to latest version, So can I upgrade directly to latest version and Is there any dependency on server firmware version also?
Posted to:
Original author:
Hello, my Server doesn`t work again. During working the server did shut down. CPU P2 was extremly hot. More than P1. After waiting approx 30Min nothing happened. Behind P2 the LED CR8 is flashing 12x short/1x long. Status LED at the front is flashing...
Posted to:
Original author:
OH MY GOD, what is this stupid piece of *****!? Can't we just update firmware without being tortured with useless stuff like that? Now the deployment of a server gets delayed because I have to wait for someone to connect the stupid USB stick to the s...
Posted to:
Original author:
Hello Shalak, This is working as per design. Whenever a non-HPE drive is being used it would flag that as Not authenticated. Unfortunately, there's no way to bypass this. It may have not flagged previously (Older Non-HPE drives) maybe due to differen...
Posted to:
Original author:
I finally figured this out definitively for my environment! Using a 32GB flash drive, I "mount" the downloaded ISO file (latest SPP > 2021040) and navigate to the USB > USBKey folder and launch USBkey.exe When the utility opens, point...
  • Legend
  • New MessagesNew Messages
  • No New Messages No New Messages
  • Hot TopicHot Topic
  • Replied-to Thread Replied-to Topic
  • Read Only ThreadRead-Only Topic