HPE Community
ProLiant Servers - Netservers
1754639 Members
3135 Online
108823 Solutions
New Discussion

Who Me Too'd this topic

Derrickpjh999
Occasional Visitor

‎03-11-2022 12:20 AM - edited ‎03-11-2022 12:26 AM

‎03-11-2022 12:20 AM - edited ‎03-11-2022 12:26 AM

HPE Proliant Microserver Gen10 Plus - Compatible GPUs

Hi, I currently have a unit of the microserver gen10 plus, currently running on Ubuntun LTS 18.04. I have tried to install a Tesla T4 NVIDIA GPU into the microserver. When I run the command lspci, it is able to detect the GPU as a 3D controller in the PCI slot. However it is not able to connect to the nvidia driver and would always get this message:

NVIDIA-SMI has failed because it couldn’t communicate with the NVIDIA driver

Stuffs that I have tried:

  • Updating the kernel to 5.X
  • Updating the System Rom /BIOS to the latest version - U48
  • Checked that secure boot is disabled
  • Checked for "4G decoding" in the BIOS but it is not available in the BIOS

Does anyone have a list of supported GPUs specifically for this server so that I can make a separate GPU purchase, or knows if the NVIDIA T4 GPU is compatible for this microserver, or knows the necessary steps required to allow the T4 GPU to run on this server. Thanks

1 person had this problem.
0 Kudos
Reply
Who Me Too'd this topic
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.