Storageworks 8/8 San Switch not booting

[RichTea1973]

Hi All,

I have a switch that has the green power LED, and amber exclamation mark. I have connected to serial and get the following output. Any ideas on how to resolve this?

The system is coming up, please wait...

U-Boot 1.1.3 (Apr 13 2016 - 17:45:48)

CPU: AMCC PowerPC 440EPx Rev. A at 660 MHz (PLB=132, OPB=66, EBC=33 MHz)
No Security/Kasumi support
I2C boot EEPROM enabled
Bootstrap Option G - Boot ROM Location I2C (Addr 0x54)
Internal PCI arbiter enabled, PCI async ext clock used
32 kB I-Cache 32 kB D-Cache
Board: Tomahawk
I2C: ready
DRAM: Initializing DDRSDRAM
DDR Init: speed = 132000002
DQS calibration - Window detected:
max_passing_cases = 1
wr_dqs_shift = 95
dll_dqs_delay_X = 21
dll_dqs_delay_X window = 21 - 21
DDR0_09=0x00011d5f
DDR0_22=0x00267f0b
DDR0_17=0x15005e00
DDR0_18=0x15151515
DDR0_19=0x15151515
ECC Enabling DONE
512 MB
POST RAM test disabled.

Kind Regards

Richard

[Ivan_B]

Hi @RichTea1973 !

Please, post your question in the Storage forum - https://community.hpe.com/t5/Storage/ct-p/itrc-120 , here you will hardly find anybody familiar with Storageworks SAN series.

[RichTea1973]

Thank you, I have reposted in there