Posted to: ProLiant Servers (ML,DL,SL)
yesterday I just bought three used DL360 Gen9 LFF servers. I already had a couple of these. I updated the firmware and installed RHEL 9. When I got done, I powered the new ones off, and for some reason, the fans are blowing even when powered off. My previous D...
Posted to: ProLiant Servers (ML,DL,SL)
15 hours ago Hello friends, good day. How can I identify the authenticity of a piece of RAM or hard drive? Purchases made from China are often non-original and I cannot distinguish which ones are original and which ones are fake.
Posted to: Servers - General
yesterday Hello,One of our clients has lost the key to their ML30 G10 server.How can they open the bezel. Posted to: Servers - General
Friday Hello i just recently bought and installed a proliant ml110 gen11 server and everything went fine. But when i tried setting up my first raid(RAID1 between 2 ssd's) i got this error:500 - ("status"-"fail" "message""Internal Server Error" "data" "bytes... Posted to: Servers - General
Friday Hello Community,I have a server HPE DL380 Gen10.I would like to add external Drive enclosure D3710 Kindly advise which controller or HBA is suitableBelow are some options which i was consideringHPE Smart Array E208e-p SR Gen10 (8 External Lanes/No Ca... Posted to: ProLiant Servers (ML,DL,SL)
2 weeks ago Hello,Just powered on a DL160G9 (1x cpu, 8xdimm) . Now all four the LEDs are flashing in sets of 3 or 9, no video. ILO has two error messages: one being for the Power backpane the other for CPU01 memory chan01. I have reseated all the RAM and shuffle... Posted to: Operating System - HP-UX
2 weeks ago If the MCSG-RAC Rawdevice Volume Group is vg01I want to change PV of vg01 to another storage, so I'm working on it.New Storage: Newdisk#1, #2, #3Old Storage: Old disk#1, #2, #3<Node#1>Add Newdisk #1, #2, and #3 (PV) to VG01 while online.#lvextend -m ... Posted to: ProLiant Servers (ML,DL,SL)
7 hours ago I got a replacement board for my server and I can't update the bios, when I initiate the update I get an RSOD (x64 Exeption Type OD - General Protection Exeption), Once I restart the server everything works as intended but no bios update. The board's... Posted to: ProLiant Servers (ML,DL,SL)
Friday Hello everyone, I am trying to install Agentless Management Service on a DL20 gen10 plus server, in order to decrease fan speed.The customer used the following command:sudo apt install hp-health hponcfg amsd ams ssacli ssaducli ssafound in the follow... Posted to: Servers - General
yesterday HiWe have a DL380 G10 with a HPE SN1100Q 16Gb Dual Port Fibre Channel, also we have a MSA 2060. MSA directly connected to server by FC to SN1100Q. ESXi 6.7 Installed on server and a veeam backup installed as a VM, also we have other VMs on server. we...
