Posted to: ProLiant Servers (ML,DL,SL)
7m ago First of all, I do not know how serious or business-oriented the forum is, my first topic and my first post, so if I make any bad wording or make a mistake, I apologize in advance.My question is as in the title, I wanted to use the tpm header to easi...
Posted to: Operating System - Microsoft
4 hours ago I need to do a clean install from scratch of Windows Server 2019 on five, DL360 Gen 9 servers. Is there an instruction document for this? Posted to: MSA Storage
5 hours ago I Have HPE MSA 2060 LFF ISCSI , But my servers network and my switch are all FC.Is there a way to convert this storage to FC ?If I get a separate FC controller and replace it on the storage, will it be supported?Please guide me Posted to: MSA Storage
6 hours ago I have several questions related to an MSA2060Where can I find the MIBs for the MSA2060, ned to integrate with Solarwinds Orion What is the recommended Maximum Volume size for an MSA based LUN conecting to a Windows 2022 system?Are there O/S specifi... Posted to: ProLiant Servers (ML,DL,SL)
yesterday Hello community. Is there a way to create a bootable USB or DVD/ISO from the boot partition (C:) of a functioning Windows Server 2016 running on a DL380 Gen10 with RAID configuration? I need to boot from a source that has all the HPE drivers loaded... Posted to: ProLiant Servers (ML,DL,SL)
Sunday A Client has an ML350G6 that was originally configured from the distributor with (1) array in RAID 0. I am trying to add additional drives to the controller to configure a second array in RAID 5. I am using HP SAS drives, however when accessing the A... Posted to: Operating System - HP-UX
yesterday Is it possible to get an HP-UX license for personal use? Commercial UNIXes are a bit of a mystery to me and I'd like to try it out. Posted to: HPE 3PAR StoreServ Storage
2 weeks ago Can you create more than one host definition for the same host initiator so that we can have one host definition in one Virtual Domain and the other in another Virtual Domain? But effectively its the same host. Looking to present volumes from two dif... Posted to: BladeSystem - General
06-21-2020 Hi,I have synergy gen10 blades, with ilo5. I am looking into automating the option to boot from pxe ,for what I need to define the VLAN Mode as enabled (disabled by default) and set the VLAN ID.I know how to change boot order, but without these optio... Posted to: ProLiant Servers (ML,DL,SL)
Sunday When i plugin my sas hard disk into my dl360 gen9. My system can not found the new hard disk. I think it must use the hpe smart arry disk mode to config. However , when i switch the disk mode to smart arry mode. And into the hpe ssa to config my hard...
