Tru64 4.0g SNMP woes

[Michael Osburn]

I am in the unfortunante position of upgrading our monitoring system to a snmp based system. On our older 4.0G servers I am unable to pull all the information that I am needing to make the system happy. Is there a way to have Tru64 respond to the following OIDs or is there a specific oid that is in 4.0G that provides the same result?

component Net-SNMP OID
memBuffer 1.3.6.1.4.1.2021.4.14.0
ssCpuRawSystem 1.3.6.1.4.1.2021.11.52.0
memCached 1.3.6.1.4.1.2021.4.15.0
ssCpuRawWait 1.3.6.1.4.1.2021.11.54.0
memAvailSwap 1.3.6.1.4.1.2021.4.4.0
ssCpuRawUser 1.3.6.1.4.1.2021.11.50.0
laLoadInt5 1.3.6.1.4.1.2021.10.1.5.2
ssCpuRawIdle 1.3.6.1.4.1.2021.11.53
memAvailReal 1.3.6.1.4.1.2021.4.6.0


Thanks All

Michael

[Johan Brusche]

+
Is CPQIM installed on the system ?

If not, you can get it from:
http://h20392.www2.hp.com/portal/swdepot/displayProductInfo.do?productNumber=T64_CPQIM360-370

Rgds,

___ Johan.

[Michael Osburn]

Thanks for the heads up. I just got one of our 5.0 servers responding correctly and have started to search for the install for 4.0g. The 3.7 link that you gave says it does not support the 4.0 series.

Michael

[Johan Brusche · Accepted solution]

But CPQIM360 does, and its in the same link.

__ Johan

[Michael Osburn]

Must not have been paying attention to all the links. Thanks for pointing that out.

Michael