HPE Community
ProLiant Servers (ML,DL,SL)
1761506 Members
4371 Online
108902 Solutions
New Discussion

Re: Configuring "Authentication Failures Before Delay" feature via hponcfg

 
CSeraphine
Occasional Visitor

‎08-26-2015 10:40 AM

‎08-26-2015 10:40 AM

Configuring "Authentication Failures Before Delay" feature via hponcfg

ILO4 firmware 2.22 introduces a setting whereby the failed-password login delay can be tuned.   Unfortunately, I see no means of configuring it in the ILO's RIBCL dump or in the ILO CLI's /map1 area  (although it can be set via the web GUI).

 

Does anyone know of a way that it can be set via hponcfg (or failing that, the ILO command line)?   GUIs are nice for one-offs but they do not scale well.

0 Kudos
Reply
1 REPLY 1
sakthivenkatesh
Occasional Visitor

‎02-17-2020 08:22 AM

‎02-17-2020 08:22 AM

Re: Configuring "Authentication Failures Before Delay" feature via hponcfg

Old post i know but did you figure this out in the end?>

0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.