HPE Community
Legacy
Legacy
Have questions about HPE servers and operating systems? Find archived questions and answers in this read-only HPE Community forum.
1754407 Members
3161 Online
108813 Solutions
New Discussion

Join the conversation with experts and colleagues

Register with HPE Community
HPE 9000 and HPE e3000 Servers: : Read-only board starting June 5 '23
Parvez_Admin
06-04-2023
Posted to:
HPE 9000 and HPE e3000 Servers
Original author:
Parvez_Admin
HPE 9000 and HPE e3000 Servers board will be in read-only mode starting June 5 '23 Please click the link below for more details: HPE 9000 and HPE e3000 Servers board will be read ... - Hewlett Packard Enterprise Community
Integrity Superdome SX1000 Server - Compatibility to 3PAR
Sunitha_Mod
06-01-2023
Posted to:
HPE 9000 and HPE e3000 Servers
Original author:
Sunitha_Mod
Moved to Integrity Servers
HPE 3000 968LX stuck at Initialize Volume Management
968LX_Fix
01-30-2023
Posted to:
HPE 9000 and HPE e3000 Servers
Original author:
968LX_Fix
Hi all, First time poster, so my apologies if this is in the wrong place. I have an old HPE 3000 968LX server that I need to get back online to recover some data from. It was functioning perfectly up until a power outage a few months ago. Now when I...
CP008052.EXE /silent /force
Marcel Bamert
03-06-2008
Posted to:
Windows Server 2003
Original author:
Marcel Bamert
Hi If I install the driver myself, the driver will be installed properly. If I install the driver with our software distribution tool, I get the following error message. Does anybody know how to resolve the problem? Marcel ---------------------------...
Is WSAPI same for HPE 9000 and HPE 6000 ?
Mahendra_Kamble
09-16-2022
Posted to:
HPE 9000 and HPE e3000 Servers
Original author:
Mahendra_Kamble
Hi team, I have gone through the below WSAPI documentation which is basically for the HPE 9000 array. HPE 9000 WSAPI I just wanted to know whether this WSAPI is also the same for the HPE 6000 family as well or do we have different WSAPI/APIs availabl...
graphics for freeaxp
BlueBadger
08-01-2021
Posted to:
Alpha Servers
Original author:
BlueBadger
Hello Hey all is there anyway to put graphics in the freeaxp emulator if so how. Thanks in adavace Philip King BlueBadger
Re: socket error 10013 when starting hpsum on 2008r2
cKo7ii
10-11-2016
Posted to:
ProLiant Deployment and Provisioning
Original author:
alfl
As an additional workaround you can define the ports from executable, for example: C:\Temp\SPP2016.04\\hp\swpackages\x64>hpsum_bin_x64 /port 2560 /ssl_port 4443 hpsum_service_x64.exe started successfully on port 2560, ssl port 4443 and ftp port di...
Re: Find MP IP address from HP-UX
boukari
02-05-2015
Posted to:
HPE 9000 and HPE e3000 Servers
Original author:
gnana prakasam
For most Integrity servers you can get the MP address from the system management homepage. Current servers have a boot menu entry to set/get this address too. if you have sfm installed try : #/opt/sfm/bin/CIMUtil -e root/cimv2 HP_ManagementProcessor...
Re: Query: Is WSAPI same for HPE 9000 and HPE 6000 ?
Suman_1978
09-20-2022
Posted to:
HPE 9000 and HPE e3000 Servers
Original author:
Mahendra_Kamble
Hi, As far as I know, its not compatible. I could not find any documentation which shows the compatibility of WSAPI with these two Arrays. Thank You! I work with HPE but opinions expressed here are mine. Recent Support Video Releases
  • Legend
  • New MessagesNew Messages
  • No New Messages No New Messages
  • Hot TopicHot Topic
  • Replied-to Thread Replied-to Topic
  • Read Only ThreadRead-Only Topic
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.