Hi
Does anyone know if Simplivity Gen9 have ESXI limitation on Installed version
I would like to install latest esxi7.0 version (7.0U3).
Simplivity version would be 4.1.0u1
Thanks
Solved! Go to Solution.
System recommended content:
1. ESXi Upgrade on HPE DL380 Gen9 Servers Produces Error: HA Agent Unreachable
(Moderator : The Above link is no longer Accessible. Kindly visit HPE Support Center for more information)
Please click on "Thumbs Up/Kudo" icon to give a "Kudo".
Thank you for being a HPE valuable community member.

Hi giladzzz
SimpliVity Gen9 supports ESXi 7.0u3c as the current Simplivity version of your system is 4.1.0u1.
however, the only limitation is to install ESXi 7.0u3c using CLI and not through the upgrade manager.
Please refer to the below image:
Hope this helps.!!
Regards
Mahesh.
Hello,
To add to the above, please refer to the Interoperability guide for OVC 4.1.0 U1
https://www.hpe.com/psnow/doc/a00095520en_us
Thanks,
TAM
Hi
thanks for the answers but in the latest interoperability 4.1.1u1
in the remark 3 at the biging version from 01.08.2021 its says
"Support DL380 Gen9 with ESXi 7.0 U1 & VCSA 7.0 U2b"
can you explain.
Regards
Hi Giladzzz!
The comment you are referring to is on the title page. Row 3 in this table was added when the 4.1.0U1 Interop was released on Aug 1, 2021. The 4.1.0U1 release added ESXi 7.0 support to the Gen9. The prior release did not support ESXi 7.0 for Gen9.
You can update to ESXi 7.0 U3c or U3d per the latest Interop (June 22, 2022) on Gen9. Please note that ESXi upgrade on HPE SimpliVity 380 Gen9 is to be carried out using ESXi command line because it cannot be performed via Upgrade Manager.
Cheers!
/Kipp