1833059 Members
3090 Online
110049 Solutions
New Discussion

Again Ignite Trouble

 
Bakos György
Super Advisor

Again Ignite Trouble

I will make an Ignite recovery tape:

The previous Ignite install was B.3.3.116 but I installed a newer A.3.7.95.
My machine is a C200 with HP-UX10.20

make_tape_recovery -x inc_entire=vg00 -x exclude=/tmp -a /dev/rmt/0mn

Problem:
At checking Versions of Ignite-UX filesets
Fileset: "Ignite-UX.FILE-SRV-11-00" (rev=B3.3.116) is a different version than the rest of Ignite-UX (rev=A.3.7.95). You must update all filesets....


How can I update all filesets?

I have the install source file and I tried with
swinstall -s /source/Ignite-UX-10-20_A.3.7.95_HP-UX_B.10.01_700+800.depot but after a reinstall the same trouble.

Is maybe the version what I am using not OK?
4 REPLIES 4
Franky_1
Respected Contributor

Re: Again Ignite Trouble

Hi,

maybe you should only use B. Versions and not a mix of A. and B.

HTH

Franky
Don't worry be happy
Steve Steel
Honored Contributor

Re: Again Ignite Trouble

Hi

New version has no fileset for 11.00 being 10.20 specific

Old one did have

You should swremove the old before installing the new or try to swremove the
fileset

"Ignite-UX.FILE-SRV-11-00" (rev=B3.3.116) "

Steve STeel
If you want truly to understand something, try to change it. (Kurt Lewin)
Michael Tully
Honored Contributor

Re: Again Ignite Trouble

You can get this problem if you have an ignite server that you have backed up. The only solution is to remove *all* ignite versions and reinstall a later edition.
Anyone for a Mutiny ?
Bakos György
Super Advisor

Re: Again Ignite Trouble

OK Thanks
The solution was to remove the old version quite simple, sorry to increase the size of the forum...