Looking for samba for 10.20

[irbaboon]

Hi, someone know about to samba for 10.20???

[John Poff]

Hi,

Here is one source. They have a binary depot for Samba 2.2.3a for 10.20:

http://gatekeep.cs.utah.edu/hppd/hpux/Networking/Misc/samba-2.2.3a/


JP

[Darren Prior]

Hi,

Try http://www.samba.org for a 10.20 version of Samba. However 10.20 support is ending in June 2003, so it would be far better to consider moving to 11.

regards,

Darren.

[Kelli Ward]

Hi,
Here is one of the samba mirror sites.
(Note- I have had installation troubles installing from these sites for HP-UX so if there is a problem, back out to samba.org and try another mirror. (Don't necessarily assume it's something you're doing.

http://us1.samba.org/samba/ftp/Binary_Packages/hp/

Correct me if I'm wrong, if you have the 10.2 application CD's, doesn't that contain CIFS server on one CD and CIFS client on another?

You might check there if you have them.

GL,
Kel

[H.Merijn Brand (procura]

CiFS is only shipped on the 11.00 and 11i Application CD's, not for 10.20

And however HP tells us to move from 10.20 to 11.00 or 11i, we still have to earn our living from customers that still have 10.20, and until all customers made the move to a new machine (and hence 11.00 or 11i, since 10.20 ain't supported on new hardware), we *have to* do 10.20. Final. It's reality.

Enjoy, have FUN! H.Merijn

[Michael Steele_2]

ASU/9000 was the product of choice upto HP-UX 11.00 and what most users used on 10.20 platforms. HP stopped supporting ASU/9000 last December and now ships SAMBA / CIFS/9000.

[Kelli Ward]

Thanks procura.
I don't have a set handily available and couldn't remember.

Kel

[Ravi_8]

Hi,

10.20 does n't come with samba(CIFS), John has posted the available URL.

11i comes along with CIFS(samba)

[irbaboon]

Hi, thanks for your answer...

But another problem.... after depot samba instalation, only /opt/samba tree is created. How I can configurate it without using swat (my system dont have a graphic console).

P.S. All critical patches are installed.

[Ravi_8 · Accepted solution]

Hi,

login to that HP machine from your desktop using CDE ( i am using exceed) and export the display to your desktop and use swat.

if not login to HP mchine thru any solaris machine which by default comes with graphics console and export the display and then swat

[Darren Prior]

Hi,

The great thing about swat is that you can use it from another system with a browser. Just point it at http://yourserver:901 (port 901 is the standard swat port for Samba I believe.)

Another option is to build the smb.conf file from scratch. The Using Samba book from O'Reilly has lots of examples of smb.conf configuration.

regards,

Darren.