When he tries the VG Display, error message appears.

[Robert T. Lott]

CRMSGI5M - HP-PRC-K460 I replaced the pri boot disk this morning because I lost vg00 trying to restore from cd getting the following, pls see attachment, need help been in an outage since 8am est this morning...
Thx

[Florian Heigl (new acc) · Accepted solution]

I can't read most of that log of Your's, much of it seems to be control characters or such.

can You drop me a line at fheigl ...a...t... munichre.com?


otherwise:
what is /dev/dsk/c1t2d0?
am I guessing right in that vg00 has one disk c0t6d0, and (right now not) vg01 would be the two others c0t4d0 and c0t5d0?



in that case:

boot to lvm mainteanance mode (hpux -lm)

mkdir /dev/vg01
mknod /dev/vg01/group c 64 0x010000
vgimport -v /dev/vg01 /dev/dsk/c0t4d0 /dev/dsk/c0t5d0
vgchange -a r /dev/vg01 #-r just for testing, if it works use -a y


the missing tset and tabs programs make it appear that Your vg00 or /usr/bin is not completely.
is /usr being mounted?

[Florian Heigl (new acc)]

btw - what software did You plan to install at end?

[Florian Heigl (new acc)]

ummm - I read over the log a few more times, ignore the /usr/bin thing, I now found the hpux -is line. sorry about that one :)

[Sanjay_6]

Hi Robert,

Your attachment has a lot of junk and it is difficult to understand what we are looking for. Can you explain your problem ?.

Thanks
Sanjay

[Florian Heigl (new acc)]

Robert - You assigned points - does it work again?

Please update us ;)

[Robert T. Lott]

Not just yet, what I mean is the system is up but now my recovery has to be completed and it could take up to 10 hrs. Had to replace a second drive and reload the OS from CD HP 11.0 .../RECOVERY CD it took forever, just about all day now I'm experiencing problems with my FIDDI 55 LAN connection so I can begin the EBR via the network...
Thx