DVD H/W path not found

Kuang Chen · ‎03-03-2009

Server hp rp7420 two partition 0 & 1, currently on HPUX 11.11. I am working on to reinstll cold-install 11i v2 in partition 0.
But I used MP command SEA all, I can not found the DVD path and not able to boot from DVD.

Is anyone know what happen?

Thanks
KC

Torsten. · ‎03-03-2009

The path is by default

1/0/0/3/1.2.0

can you try to boot from directly?

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!

Kuang Chen · ‎03-03-2009

try to before but not work.

Path# Device Path (dec) Device Type Rev
----- ----------------- ----------- ----
P0 0/0/0/3/0.6 Random access media 4
P1 0/0/0/3/0.5 Random access media 4
0/0/10/1/0.0 Fibre Channel Protocol 10
0/0/12/1/0.0 Fibre Channel Protocol 10
P2 0/0/14/1/0.4 Sequential access media 2
P3 0/0/14/1/1.5 Sequential access media 2

Torsten. · ‎03-03-2009

Because you have 2 partitions, you are now on the partition without the internal DVD - it is connected to the other partition.

You will need another DVD drive.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!

Kuang Chen · ‎03-03-2009

We do have second DVD for this partition. I was able to use this DVD driver when I boot on HPUX 11.11.

Torsten. · ‎03-03-2009

So you need to check the external drive, cable and terminator.

Your devices listed are the internal disks, fiber channel HBAs and 2 tapes.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!

Mel Burslan · ‎03-03-2009

Since we do not do VPARs on HPUX here, what I am going to suggest is going to be virtual but could you possible swap the DVD drives using VPAR management tools. You might have a bad DVD drive hardware-wise. Especially if it showed up in previous boot times and not showing up right now, it might have gone bad.

Just my 2 cents.

________________________________
UNIX because I majored in cryptology...

Steven E. Protter · ‎03-03-2009

Shalom,

Check into the vitural drive and see that the external one you have hooked up is supported by HP-UX. Most are not supported as boot devices.

SEP

Steven E Protter
Owner of ISN Corporation
http://isnamerica.com
http://hpuxconsulting.com
Sponsor: http://hpux.ws
Twitter: http://twitter.com/hpuxlinux
Founder http://newdatacloud.com

Kuang Chen · ‎03-03-2009

hi, guy,

DVD are working fine when I boot from disk OS HPUX 11.11.

The rp7420 setup as nPAR partition 0 & 1.
par 0 have external SCSI DVD and par 1 have internal DVD. Is rp7420 only able to boot from internal DVD? Is this true?

Thanks
KC

Torsten. · ‎03-03-2009

No, not true.

Could you please post an

# ioscan -fn

from hp-ux?

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!

Kuang Chen · ‎03-03-2009

HP-UX B.11.11 U 9000/800 3082755885

# ioscan -fn
Class I H/W Path Driver S/W State H/W Type Description
==============================================================================
root 0 root CLAIMED BUS_NEXUS
cell 0 0 cell CLAIMED BUS_NEXUS
ioa 0 0/0 sba CLAIMED BUS_NEXUS System Bus Adapter (805)
ba 1 0/0/0 lba CLAIMED BUS_NEXUS Local PCI Bus Adapter (782)
tty 0 0/0/0/0/0 asio0 CLAIMED INTERFACE PCI SimpleComm (103c1290)
/dev/diag/mux0 /dev/mux0 /dev/tty0p0
tty 1 0/0/0/0/1 asio0 CLAIMED INTERFACE PCI Serial (103c1048)
/dev/GSPdiag1 /dev/mux1 /dev/tty1p2
/dev/diag/mux1 /dev/tty1p0 /dev/tty1p4
ext_bus 0 0/0/0/3/0 c8xx CLAIMED INTERFACE SCSI C1010 Ultra160 Wide LVD A6793-60001
target 0 0/0/0/3/0.5 tgt CLAIMED DEVICE
disk 0 0/0/0/3/0.5.0 sdisk CLAIMED DEVICE HP 36.4GST336754LC
/dev/dsk/c0t5d0 /dev/rdsk/c0t5d0
target 1 0/0/0/3/0.6 tgt CLAIMED DEVICE
disk 1 0/0/0/3/0.6.0 sdisk CLAIMED DEVICE HP 36.4GST336754LC
/dev/dsk/c0t6d0 /dev/rdsk/c0t6d0
target 2 0/0/0/3/0.7 tgt CLAIMED DEVICE
ctl 0 0/0/0/3/0.7.0 sctl CLAIMED DEVICE Initiator
/dev/rscsi/c0t7d0
ext_bus 1 0/0/0/3/1 c8xx CLAIMED INTERFACE SCSI C1010 Ultra Wide A6793-60001
target 3 0/0/0/3/1.6 tgt CLAIMED DEVICE
ctl 1 0/0/0/3/1.6.0 sctl CLAIMED DEVICE Initiator
/dev/rscsi/c1t6d0
ba 2 0/0/1 lba CLAIMED BUS_NEXUS Local PCI-X Bus Adapter (783)
ba 3 0/0/2 lba CLAIMED BUS_NEXUS Local PCI-X Bus Adapter (783)
ba 4 0/0/4 lba CLAIMED BUS_NEXUS Local PCI-X Bus Adapter (783)
ba 5 0/0/6 lba CLAIMED BUS_NEXUS Local PCI-X Bus Adapter (783)
unknown -1 0/0/6/1/0 UNCLAIMED UNKNOWN PCI-X Ethernet (80861079)
unknown -1 0/0/6/1/1 UNCLAIMED UNKNOWN PCI-X Ethernet (80861079)
ba 6 0/0/8 lba CLAIMED BUS_NEXUS Local PCI-X Bus Adapter (783)
ba 7 0/0/8/1/0 PCItoPCI CLAIMED BUS_NEXUS PCItoPCI Bridge
ext_bus 2 0/0/8/1/0/1/0 c8xx CLAIMED INTERFACE SCSI C1010 Ultra160 Wide LVD A6794-60001
target 4 0/0/8/1/0/1/0.2 tgt CLAIMED DEVICE
disk 2 0/0/8/1/0/1/0.2.0 sdisk CLAIMED DEVICE _NEC DVD_RW ND-3550A
/dev/dsk/c2t2d0 /dev/rdsk/c2t2d0
target 5 0/0/8/1/0/1/0.7 tgt CLAIMED DEVICE
ctl 2 0/0/8/1/0/1/0.7.0 sctl CLAIMED DEVICE Initiator
/dev/rscsi/c2t7d0
ext_bus 3 0/0/8/1/0/1/1 c8xx CLAIMED INTERFACE SCSI C1010 Ultra160 Wide LVD A6794-60001
target 6 0/0/8/1/0/1/1.7 tgt CLAIMED DEVICE
ctl 3 0/0/8/1/0/1/1.7.0 sctl CLAIMED DEVICE Initiator
/dev/rscsi/c3t7d0
lan 0 0/0/8/1/0/4/0 igelan CLAIMED INTERFACE HP A6794-60001 PCI 1000Base-T
ba 8 0/0/10 lba CLAIMED BUS_NEXUS Local PCI-X Bus Adapter (783)
fc 0 0/0/10/1/0 td CLAIMED INTERFACE HP Tachyon XL2 Fibre Channel Mass Storage Adapter
/dev/td0
fcp 1 0/0/10/1/0.1 fcp CLAIMED INTERFACE FCP Domain
ext_bus 11 0/0/10/1/0.1.0.0.0 fcparray CLAIMED INTERFACE FCP Array Interface
target 7 0/0/10/1/0.1.0.0.0.0 tgt CLAIMED DEVICE
ctl 12 0/0/10/1/0.1.0.0.0.0.0 sctl CLAIMED DEVICE HP HSV100
/dev/rscsi/c11t0d0
ext_bus 12 0/0/10/1/0.1.0.255.0 fcpdev CLAIMED INTERFACE FCP Device Interface
target 8 0/0/10/1/0.1.0.255.0.0 tgt CLAIMED DEVICE
ctl 10 0/0/10/1/0.1.0.255.0.0.0 sctl CLAIMED DEVICE HP HSV100
/dev/rscsi/c12t0d0
ext_bus 13 0/0/10/1/0.1.1.0.0 fcparray CLAIMED INTERFACE FCP Array Interface
target 9 0/0/10/1/0.1.1.0.0.0 tgt CLAIMED DEVICE
ctl 13 0/0/10/1/0.1.1.0.0.0.0 sctl CLAIMED DEVICE HP HSV100
/dev/rscsi/c13t0d0
ext_bus 14 0/0/10/1/0.1.1.255.0 fcpdev CLAIMED INTERFACE FCP Device Interface
target 10 0/0/10/1/0.1.1.255.0.0 tgt CLAIMED DEVICE
ctl 11 0/0/10/1/0.1.1.255.0.0.0 sctl CLAIMED DEVICE HP HSV100
/dev/rscsi/c14t0d0
ba 9 0/0/12 lba CLAIMED BUS_NEXUS Local PCI-X Bus Adapter (783)
fc 1 0/0/12/1/0 td CLAIMED INTERFACE HP Tachyon XL2 Fibre Channel Mass Storage Adapter
/dev/td1
fcp 0 0/0/12/1/0.1 fcp CLAIMED INTERFACE FCP Domain
ext_bus 4 0/0/12/1/0.1.0.0.0 fcparray CLAIMED INTERFACE FCP Array Interface
target 11 0/0/12/1/0.1.0.0.0.0 tgt CLAIMED DEVICE
ctl 4 0/0/12/1/0.1.0.0.0.0.0 sctl CLAIMED DEVICE HP HSV100
/dev/rscsi/c4t0d0
hsx 0 0/0/12/1/0.1.0.0.0.0.1 hsx CLAIMED DEVICE HP HSV100
hsx 1 0/0/12/1/0.1.0.0.0.0.2 hsx CLAIMED DEVICE HP HSV100
ext_bus 5 0/0/12/1/0.1.0.255.0 fcpdev CLAIMED INTERFACE FCP Device Interface
target 12 0/0/12/1/0.1.0.255.0.0 tgt CLAIMED DEVICE
ctl 5 0/0/12/1/0.1.0.255.0.0.0 sctl CLAIMED DEVICE HP HSV100
/dev/rscsi/c5t0d0
ext_bus 6 0/0/12/1/0.1.1.0.0 fcparray CLAIMED INTERFACE FCP Array Interface
target 13 0/0/12/1/0.1.1.0.0.0 tgt CLAIMED DEVICE
ctl 6 0/0/12/1/0.1.1.0.0.0.0 sctl CLAIMED DEVICE HP HSV100
/dev/rscsi/c6t0d0
hsx 4 0/0/12/1/0.1.1.0.0.0.1 hsx CLAIMED DEVICE HP HSV100
hsx 5 0/0/12/1/0.1.1.0.0.0.2 hsx CLAIMED DEVICE HP HSV100
ext_bus 7 0/0/12/1/0.1.1.255.0 fcpdev CLAIMED INTERFACE FCP Device Interface
target 14 0/0/12/1/0.1.1.255.0.0 tgt CLAIMED DEVICE
ctl 7 0/0/12/1/0.1.1.255.0.0.0 sctl CLAIMED DEVICE HP HSV100
/dev/rscsi/c7t0d0
ba 10 0/0/14 lba CLAIMED BUS_NEXUS Local PCI-X Bus Adapter (783)
ext_bus 8 0/0/14/1/0 mpt UNCLAIMED UNKNOWN PCI-X SCSI (10000030)
ext_bus 9 0/0/14/1/1 mpt UNCLAIMED UNKNOWN PCI-X SCSI (10000030)
memory 0 0/5 memory CLAIMED MEMORY Memory
ipmi 0 0/6 ipmi CLAIMED INTERFACE IPMI Controller
/dev/ipmi
processor 0 0/10 processor CLAIMED PROCESSOR Processor
processor 1 0/11 processor CLAIMED PROCESSOR Processor
processor 2 0/14 processor CLAIMED PROCESSOR Processor
processor 3 0/15 processor CLAIMED PROCESSOR Processor
ba 0 255/255 swspBus CLAIMED VIRTBUS
ext_bus 15 255/255/0 swsp CLAIMED VIRTBUS HSV100 HP 0x50001FE150016A90
target 15 255/255/0/0 tgt CLAIMED DEVICE
disk 7 255/255/0/0.0 sdisk CLAIMED DEVICE HSV100 HP
/dev/dsk/c15t0d0 /dev/rdsk/c15t0d0
disk 8 255/255/0/0.1 sdisk CLAIMED DEVICE HSV100 HP
/dev/dsk/c15t0d1 /dev/rdsk/c15t0d1

Torsten. · ‎03-03-2009

This must be your drive

disk 2 0/0/8/1/0/1/0.2.0 sdisk CLAIMED DEVICE _NEC DVD_RW ND-3550A
/dev/dsk/c2t2d0 /dev/rdsk/c2t2d0

Try to boot in manually

ISL> bo 0/0/8/1/0/1/0.2.0

You have also an UNCLAIMED scsi HBA on path 0/0/14 - driver missing?

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!

Kuang Chen · ‎03-03-2009

Tried that last time, have following error.

Main Menu: Enter command or menu > bo 0/0/8/1/0/1/0.2.0

BCH Directed Boot Path: 0/0/8/1/0/1/0.2

Do you wish to stop at the ISL prompt prior to booting? (y/n) >> n

Initializing boot Device.

Boot IO Dependent Code (IODC) Revision 4

IODC ENTRY_INIT failed. Error Status: -3

The IODC for this boot device was unable to provide text describing the failure.
IODC ENTRY_INIT[Return Messages] failed. Error Status: -2

0x0000 00000000fffffffd 0000000000000000 0000000000000000 0000000000000000
0x0004 0000000000000000 0000000000000000 0000000000000000 0000000000000000
0x0008 0000000000000000 0000000000000000 0000000000000000 0000000000000000
0x000c 0000000000000000 0000000000000000 0000000000000000 0000000000000000
0x0010 0000000000000000 0000000000000012 0000000000000000 0000000000000000
0x0014 00000000454e4841 0000000000000000 0000000000000000 00000000454e4841
0x0018 0000000000000000 0000000000000000 0000000000000000 0000000000000000
0x001c 0000000000000400 0000000000000000 0000000000000000 0000000000000000

DVD H/W path not found

DVD H/W path not found

Re: DVD H/W path not found

Re: DVD H/W path not found

Re: DVD H/W path not found

Re: DVD H/W path not found

Re: DVD H/W path not found

Re: DVD H/W path not found

Re: DVD H/W path not found

Re: DVD H/W path not found

Re: DVD H/W path not found

Re: DVD H/W path not found

Re: DVD H/W path not found

Re: DVD H/W path not found