Ignite gone bad part 2

[matthew mills]

Thanks for the help with the "/" and "/stand" size. That fixed the error but now I have a new error.

I am igniting an L2000 HPUX 11.00 server to increase space with my new drive. When I hit GO I get this error.
ERROR: the root volume group parameters specified may result in a non-bootable configuration. You must go to the “modify volume group parameters” screen and adjust the parameters. Reducing the “max physical extens” or “max physical volume” paramenters.

MAX PHY EXT = 8691
MAX PHY VOL = 12
MAX LOG VOL = 255
PHY EXT SIZE(MB) = 4

What size should

[John Poff · Accepted solution]

Well, 12 disks is a lot for a root volume group, so I'd take that down to about 4 or 6.

JP

[Sridhar Bhaskarla]

Hi,

Make your PE at "32" MB if you want 8691 Max PE. That will support disks upto 250GB which is more than enough.

-Sri

[matthew mills]

Thanks!