Partition Information Corrupt ??????

[kumar.s]

Hello Guys ,

We have a SD32 Way Server in our envoirement -Iam Not able to query the parstatus command ,which ends with an error , When i try from other partition it displays once about the information and after that it starts giving the same error .

Details
-------
# parstatus
Warning: No action specified. Default behaviour is display all.
Error: Cabinet information unavailable.
Error: Cabinet information unavailable.
[Cabinet]
Cabinet I/O Bulk Power
Fans Fans Supplies
OK/ OK/ OK/
Cab Failed/ Failed/ Failed/
Num Cabinet Type N Status N Status N Status GSP
=== ============ ========= ========= ========== ======

Notes: N+ = There are one or more spare items (fans/power supplies).
N = The number of items meets but does not exceed the need.
N- = There are insufficient items to meet the need.
? = The adequacy of the cooling system/power supplies is unknown.

Error: Cell information unavailable.
Error: Partition information unavailable.
Error: Cabinet information unavailable.
[Chassis]
Core Connected Par
Hardware Location Usage IO To Num
=================== ============ ==== ========== ===

Error: Partition information unavailable.
[Partition]
Par # of # of I/O
Num Status Cells Chassis Core cell Partition Name (first 30 chars)
=== ============ ===== ======== ========== ===============================
#
# parstatus -AC
Error: Cell information unavailable.
No available cell and cell slot.
# parstatus -V -p 0
Error: Partition information unavailable.
# parstatus -V -p 1
Error: Partition information unavailable.

----------------

Kindly guide me what is the cause and where the problem lies.

Regrads
Sathish

[Prashanth.D.S · Accepted solution]

Hi Sathish,

Suggest you to reset the MP that should resolve the issue...

Can you paste the DF output from GSP/MP

Best Regards,
Prashanth

[Prashanth.D.S]

To reset use the below command...

MP:CM> XD


Prashanth

[kumar.s]

Prasanth
Thanks for your reply
I have pasted the df command from the GSP It gives lot of errors , Does XD requires reboot or panics other partitions ?
--------------------------------------
GSP:CM> df

This command displays the FRU ID information for the selected FRU.

Do you want a specific FRU or a dump? ([S]/D) d

A - ALL - All FRU devices in a cabinet.
B - HCPB - Cell power board.
C - CIO - Core IO (contains PACI)
D - DIMM
G - UGUY
H - SBCH
I - HIOB
O - HIOPB - IO back plane power board.
P - HBPB - Main back plane power board.
R - HLSB/HRSB
S - SBC
W - HCB - Cell
X - BPS
U - CPU - CPU (located on Cell)
Select FRU : a

Enter cabinet number: 0

The Entity you have selected is ALL, in Cabinet 0

Retrieving information for 329 FRU(s)

WARNING: Checksum is not valid for FRU CIO: Location 1, 3

ERROR: There has been an error retrieving FRU HCB: Location 0
RtnCodeUsbDevTimeout

ERROR: There has been an error retrieving FRU HCB: Location 4
RtnCodeUsbDevTimeout

ERROR: There has been an error retrieving FRU HCB: Location 5
RtnCodeUsbDevTimeout

ERROR: There has been an error retrieving FRU HCB: Location 7
RtnCodeUsbDevTimeout

ERROR: There has been an error retrieving FRU HCPB: Location 0
RtnCodeUsbDevTimeout

ERROR: There has been an error retrieving FRU HCPB: Location 4
RtnCodeUsbDevTimeout

ERROR: There has been an error retrieving FRU HCPB: Location 5
RtnCodeUsbDevTimeout

ERROR: There has been an error retrieving FRU HCPB: Location 7
RtnCodeUsbDevTimeout

ERROR: There has been an error retrieving FRU CPU: Location 0, 0
RtnCodeUsbDevTimeout

ERROR: There has been an error retrieving FRU CPU: Location 0, 1
RtnCodeUsbDevTimeout

ERROR: There has been an error retrieving FRU CPU: Location 0, 2
RtnCodeUsbDevTimeout

ERROR: There has been an error retrieving FRU CPU: Location 0, 3
RtnCodeUsbDevTimeout

ERROR: There has been an error retrieving FRU CPU: Location 4, 0
RtnCodeUsbDevTimeout

ERROR: There has been an error retrieving FRU CPU: Location 4, 1
RtnCodeUsbDevTimeout

ERROR: There has been an error retrieving FRU CPU: Location 4, 2
RtnCodeUsbDevTimeout

ERROR: There has been an error retrieving FRU CPU: Location 4, 3
RtnCodeUsbDevTimeout

ERROR: There has been an error retrieving FRU CPU: Location 5, 0
RtnCodeUsbDevTimeout

ERROR: There has been an error retrieving FRU CPU: Location 5, 1
RtnCodeUsbDevTimeout

ERROR: There has been an error retrieving FRU CPU: Location 5, 2
RtnCodeUsbDevTimeout

ERROR: There has been an error retrieving FRU CPU: Location 5, 3
RtnCodeUsbDevTimeout

ERROR: There has been an error retrieving FRU CPU: Location 7, 0
RtnCodeUsbDevTimeout

ERROR: There has been an error retrieving FRU CPU: Location 7, 1
RtnCodeUsbDevTimeout

ERROR: There has been an error retrieving FRU CPU: Location 7, 2
RtnCodeUsbDevTimeout

ERROR: There has been an error retrieving FRU CPU: Location 7, 3
RtnCodeUsbDevTimeout

ERROR: There has been an error retrieving FRU DIMM: Location 0, 0A
RtnCodeUsbDevTimeout

ERROR: There has been an error retrieving FRU DIMM: Location 0, 6A
RtnCodeUsbDevTimeout

ERROR: There has been an error retrieving FRU DIMM: Location 0, 2A
RtnCodeUsbDevTimeout

ERROR: There has been an error retrieving FRU DIMM: Location 0, 4A
RtnCodeUsbDevTimeout

ERROR: There has been an error retrieving FRU DIMM: Location 0, 0B
RtnCodeUsbDevTimeout

ERROR: There has been an error retrieving FRU DIMM: Location 0, 6B
RtnCodeUsbDevTimeout
and soo on .....
--------------------------------------


Regards
Sathish Kumar

[Prashanth.D.S]

Yep..

Reset the GSP now and if the issue re-occurs you may have to get the GSP card replaced..

Try and let me know the status..

GSP:CM>XD ===> select R

Best Regards,
Prashanth

[kumar.s]

Thanks Prasanth

After Resetting the GSP iam able to query with the parstatus command

Regards
Sathish kumar