Solved! Go to Solution.
Shalom,
bad disk.http://docs.hp.com/en/7161/LVM_OLR_whitepaper.pdfhttp://docs.hp.com/en/T1859-90048/ch04s07.html
[Admin: The above links are no longer valid, please refer the below link instead:
SEP
Hi,
Try this thread http://forums11.itrc.hp.com/service/forums/questionanswer.do?threadId=926691
[Admin: The above links are no longer valid]
Check this doc, you can see the vgchange and vgdisplay error and what to do to resolve
In these kind of issues,
no need to worry.
You may face taking too much time to "
@gurudatta_1 wrote:
Hi all,
i am able to see all disks with ioscan and the not able to mount the same volume group , checked with the syslog it was throwihg
the io error tried restarting the server after that error is cleared,we re getting the below mentioned msg. when i check the vgdisply -v
@server located @ the remote location
vgdisplay: Warning: couldn't query physical volume "/dev/dsk/c4t0d7":
The specified path does not correspond to physical volume attached to
this volume group
vgdisplay: Warning: couldn't query physical volume "/dev/dsk/c6t0d7":
The specified path does not correspond to physical volume attached to
this volume group
vgdisplay: Warning: couldn't query physical volume "/dev/dsk/c8t0d7":
The specified path does not correspond to physical volume attached to
this volume group
vgdisplay: Warning: couldn't query physical volume "/dev/dsk/c10t0d7":
The specified path does not correspond to physical volume attached to
this volume group
vgdisplay: Warning: couldn't query all of the physical volumes.
VG Name /dev/vgmost
VG Write Access read/write
VG Status available
Max LV 255
Cur LV 2
Open LV 2
Max PV 16
Cur PV 7
Act PV 6
Max PE per PV 15360
VGDA 12
PE Size (Mbytes) 4
Total PE 1530
Alloc PE 1393
Free PE 137
Total PVG 0
Total Spare PVs 0
Total Spare PVs in use 0
VG Name /dev/vgOldRoot
VG Write Access read/write
VG Status available
Max LV 255
Cur LV 8
Open LV 8
Max PV 16
Cur PV 1
Act PV 1
Max PE per PV 4617
VGDA 2
PE Size (Mbytes) 8
Total PE 4607
Alloc PE 2442
Free PE 2165
Total PVG 0
Total Spare PVs 0
Total Spare PVs in use 0
VG Name /dev/temp
VG Write Access read/write
VG Status available
Max LV 255
Cur LV 1
Open LV 1
Max PV 16
Cur PV 1
Act PV 1
Max PE per PV 9215
VGDA 2
PE Size (Mbytes) 4
Total PE 9214
Alloc PE 13
Free PE 9201
Total PVG 0
Total Spare PVs 0
Total Spare PVs in use 0
Regards
Gurudatta NR
@gurudatta_1 wrote:
Hi all,
i am able to see all disks with ioscan and the not able to mount the same volume group , checked with the syslog it was throwihg
the io error tried restarting the server after that error is cleared,we re getting the below mentioned msg. when i check the vgdisply -v
@server located @ the remote location
vgdisplay: Warning: couldn't query physical volume "/dev/dsk/c4t0d7":
The specified path does not correspond to physical volume attached to
this volume group
vgdisplay: Warning: couldn't query physical volume "/dev/dsk/c6t0d7":
The specified path does not correspond to physical volume attached to
this volume group
vgdisplay: Warning: couldn't query physical volume "/dev/dsk/c8t0d7":
The specified path does not correspond to physical volume attached to
this volume group
vgdisplay: Warning: couldn't query physical volume "/dev/dsk/c10t0d7":
The specified path does not correspond to physical volume attached to
this volume group
vgdisplay: Warning: couldn't query all of the physical volumes.
VG Name /dev/vgmost
VG Write Access read/write
VG Status available
Max LV 255
Cur LV 2
Open LV 2
Max PV 16
Cur PV 7
Act PV 6
Max PE per PV 15360
VGDA 12
PE Size (Mbytes) 4
Total PE 1530
Alloc PE 1393
Free PE 137
Total PVG 0
Total Spare PVs 0
Total Spare PVs in use 0
VG Name /dev/vgOldRoot
VG Write Access read/write
VG Status available
Max LV 255
Cur LV 8
Open LV 8
Max PV 16
Cur PV 1
Act PV 1
Max PE per PV 4617
VGDA 2
PE Size (Mbytes) 8
Total PE 4607
Alloc PE 2442
Free PE 2165
Total PVG 0
Total Spare PVs 0
Total Spare PVs in use 0
VG Name /dev/temp
VG Write Access read/write
VG Status available
Max LV 255
Cur LV 1
Open LV 1
Max PV 16
Cur PV 1
Act PV 1
Max PE per PV 9215
VGDA 2
PE Size (Mbytes) 4
Total PE 9214
Alloc PE 13
Free PE 9201
Total PVG 0
Total Spare PVs 0
Total Spare PVs in use 0
Regards
Gurudatta NR
ioscan".
First check /etc/lvmtab with strings command.
Check the lvmtab entries are the same with error pv names.
If not same,
do take backup of "/etc/lvmtab" and do "vgscan".
check new lvmtab entry with strings command and compare new lvmtab with the old lvmtab.
Now try with vgdisplay or ioscan.
..A