HPE Oneview send test snmp trap

[erki72]

Hi

We are using Oneview 6.6.
We configured SNMPv3. Unfortunately, nothing arrives in the target system.

Can I send a test trap? I can not find that...

[support_s]

System recommended content:

1. HPE OneView 6.3 User Guide for HPE Synergy | Send SNMP test traps

2. HPE OneView 6.6 User Guide for HPE Synergy | Send SNMP test traps

Please click on "Thumbs Up/Kudo" icon to give a "Kudo".

Thank you for being a HPE valuable community member.

[erki72]

Uh, an i have no Logical Interconnect:
"No Logical Interconnect"

[MV3]

Hi There,

Is this a new setup or an existing setup?
Is this onview configured for a synergy frame or a C7000 Enclosure?

Cheers

[erki72]

Hi,

Oneview is only responsible for DL38x Gen10 servers.

No blade, no chassis.

Regards

[MV3]

HI,

HPE OneView uses the ILO SNMP interface for server management.

Have you configured SNMP on iLO too?

If not configured, refer to the below link to configure the same.

https://support.hpe.com/hpesc/public/docDisplay?docId=a00105236en_us&page=GUID-944A9045-D2BD-480F-A68E-5856C7E9FD7C.html

Cheers