HPE ProLiant
Have questions about ProLiant servers installation, usage, maintenance, and upgrades? Find answers and share knowledge in this HPE community forum.
1824971 Members
3274 Online
109678 Solutions
New Discussion

Join the conversation with experts and colleagues

Posted to:
Original author:
Hi everyone, I have an **HPE ProLiant DL385 Gen11** server, and I'm looking to use the **HPE Azure Local Instance Deployment and Update Snap-in** for firmware and software updates within an **Azure Local Instance** environment. However, I noticed tha...
Posted to:
Original author:
Hi, I configure an HPE proliant DL20 server with a RAM upgrade at 64gb (i.e. 16 GB Udimm X4) but I end up with the same error despite all the precautions and attempts BIOS reset and update Rom update ... The slots are normally good (it goes very well...
Posted to:
Original author:
Hi everyone, I recently formatted my HPE ml30 gen10 with an essential version of windows server 2019 and I was looking for compatible drivers for the PCI, I also tried searching on the official HPE website but I found no results.
Posted to:
Original author:
Hello! I'm having issues upgrading an older existing server outfitted it with 4x Xeon 8180's and a modest 256GB of DDR4 2666MHz RDIMM memory with two primary channels populated per-socket in slots 8 and 10 (CH1, CH2). Each CPU has been verfied to com...
Posted to:
Original author:
We have an old ML370 G4 server with 641 raid cards. We had 2 cards ( one spare ). The installed one is broken and now we have no spare card. The decision was made to purchase a new compatible card. what are our options? Part Code: 305414-001 Thanks f...
Posted to:
Original author:
Good Afternoon HP DL380 Gen11 - Windows Server 2025 Server DC I want to apply the Online ROM Flash Component for Windows x64 - HPE ProLiant ML350/DL360/DL380 Gen11 (U54) Servers (2.50_04-22-2025). When I run cp066916.exe, the system warns that "...
Posted to:
Original author:
OH MY GOD, what is this stupid piece of *****!? Can't we just update firmware without being tortured with useless stuff like that? Now the deployment of a server gets delayed because I have to wait for someone to connect the stupid USB stick to the s...
Posted to:
Original author:
Now i got it. The update method i use is via intelligent provisioning after booting up the server ("Server maintenance" -> "Firmware update"). I inserted an empty usb flash drive and got an additional popup which told me exactl...
Posted to:
Original author:
I finally figured this out definitively for my environment! Using a 32GB flash drive, I "mount" the downloaded ISO file (latest SPP > 2021040) and navigate to the USB > USBKey folder and launch USBkey.exe When the utility opens, point...
  • Legend
  • New MessagesNew Messages
  • No New Messages No New Messages
  • Hot TopicHot Topic
  • Replied-to Thread Replied-to Topic
  • Read Only ThreadRead-Only Topic