Posted to: ProLiant Servers (ML,DL,SL)
01-03-2024 I recently bought my first Gen11 server - an ML110.I found that fans make more noise if compared to older servers.When server was first started fans 3 and 4 ran at 60-65% for 3-5 minutes every 15-20 minutes.Then, after bios/firmware/drivers upgrades,... Posted to: Server Management - Remote Server Management
a week ago It is not clear to me from the documents whether it is possible to upgrade the firmware on an MR controller via ilorest. Francois Donzé says basically that ilorest can upload more payloads than it can actually process. I unzipped the fwpkg file and... Posted to: ProLiant Servers (ML,DL,SL)
08-22-2019 I just bought a ProLiant ML30 Gen 10, during POST is normal that the fan is at high level of noise, but when boot to Windows Server 2019, no matter what I do, the fan is so loud, never stop working even when the system is idle. Is impossible to work ... Posted to: HPE SimpliVity
06-30-2020 Hello I'm trying to make a backup of my simplivitys virtual controllers (Omnistack) with veeam backup and replication but the vcenter allays reply with the errorThe operation is not allowed in the current state. Any help on this? Posted to: ProLiant Servers (ML,DL,SL)
2 weeks ago We have a few VMs and two drive arrays on a DL380 Gen10 server. After a recent firmware and OS update (ESXi customized 7.0.3 from HP) the fan speeds have doubled and now run at 29-49%, which is obnoxiously loud. Nothing about the environment or the... Posted to: ProLiant Servers (ML,DL,SL)
02-16-2024 Other thread says this issue is solved but it is not. HP and their engineers have tried to fix this but it's not fixed.
Posted to: ProLiant Servers (ML,DL,SL)
2 weeks ago I just bought three used DL360 Gen9 LFF servers. I already had a couple of these. I updated the firmware and installed RHEL 9. When I got done, I powered the new ones off, and for some reason, the fans are blowing even when powered off. My previous D... Posted to: My Learning Certification
11 hours ago Access pendingAn HPE Learner ID is required to access My Learning Portal. If you are a new learner, please allow 5 business days for data flows. If it has been more than 5 business days and you do not have access, please contact support for assistanc... Posted to: ProLiant Servers (ML,DL,SL)
Wednesday Tried to create the discovery XML file using firmware-nic-intel-1.30.0-1.1's hpsetup extracted but failed. The discover operation also fails with 1.29.0 and 1.28.0 versions but it works with version 1.27.30. What's the exact cause and how to make the... Posted to: MSA Storage
a week ago HelloWe have a MSA 2050 with 1 pool. Connected via 10GB fiber to a DL380 Gen 10 Server (2 Xeon Processors & 128GB RAM). Direct connection (no switch) Controller A1 and Controller B1 ports are connected via fiber to the back of the DL380 10GB Network ...
