heartbeat IP

[srinimar]

I have configured heartbeat Ip and do i need to start something.. for SG cluster just started I have included the heart beat IP's in

/etc/hosts and /netconf files on both the nodes.

[IT_2007]

you need to configure hearbeat ip in clcmlconf.ascii to build cluster not in /etc/hosts and /etc/rc.config.d/netconf files. Remove entries from those two files.

compile cluster ascii file using cmcheckconf and cmapplyconf. If you get any errors, you need to fix them during compilation.

[srinimar]

I got this error while configuring asci file

after entring /dev/vglock i got the below message

FIRST_CLUSTER_LOCK_VG /dev/vglock

# Warning: Either no volume groups were found on all nodes and no
# Quorum Server specified,
# or all shared volume groups belong to an existing cluster.
# Use cmdeleteconf to delete existing configuration.
# A Quorum Server or a cluster lock volume group
# is required for clusters of only two nodes.
FIRST_CLUSTER_LOCK_VG

[IT_2007]

you have to specify cluster lock device name (not volume group name) if you are using cluster lock.

Ex: /dev/dsk/c2t3d4 using as cluster lock disk

[srinimar]

yeah i want to use it but how to know which disk can be used..

i mean how do we come to know..

which disk has to be used and can u tell me about that as well.

[IT_2007]

see this thread.

http://forums1.itrc.hp.com/service/forums/questionanswer.do?threadId=1059378

[melvyn burnard]

you should hav econtinued thi sdiscussion in your previous thread and NOT opened a new thread.

To answer your question, if you follow the steps outlined in the Managing Serviceguard manual you will see that you first creat a VG and then share it using vgexport/vgimport.
Once that is done, you ensure the VG is activated on one node, and then you do the cmquerycl comand, which will detect a shared Vg and pick a physical disk to be the cluster lock disk, and it will fill this in automatiocally into the ascii file