System rebooting halt at SNMP process after isntall patches

[Fauziah Mahdan]

HI all,
Just install my devp server hpux 11.11 with some patches then rebooting start it was stuck with status Busy/Wait at SNMP network Daemon.
Whay should I do next?

[Fabian Briseño]

Hello fauziah

what type of patches did you install ?

you can giva

ctrl+|

control plus pipe

this should pass SNMP network Daemon service and be sure to check rc.log and var/adm/syslog/syslog.log for more information into what went wrong.

Hope this helps.

[Dennis Handly]

If that isn't important, you can possibly skip it by typing control shift-\

[Fauziah Mahdan]

Hi all,
I duuno what patch because it was lots of list and given by tape. BTW how should I run the command it now at starting page.

All the services has tartup and hang at SNMP with status busy/wait.

[Fauziah Mahdan]

ok command ctrl+|
no result it still at busy/wait status

[Fauziah Mahdan]

Anyway this is the list of patches i just installed
PHCO_27120 umount(1M) cumulative patch
PHCO_31923 libc cumulative header file patch
PHCO_32036 mkdir(1) cumulative patch
PHCO_33136 ioscan(1M) cumulative patch
PHCO_33205 mountall, Dev IDs enabler, iSCSI support
PHCO_34214 libpam_unix cumulative patch
PHCO_34509 ksh(1) cumulative patch
PHCO_34837 auto_parms/set_parms/dhcpdb2conf
PHCO_35331 at/cron/batch cumulative patch
PHCO_35743 libc cumulative patch
PHCO_35811 mksf(1M) cumulative patch
PHCO_35845 fsck_hfs(1M) cumulative patch, iSCSI

PHCO_35875 sdiff(1) cumulative patch
PHCO_35895 ioinit(1M) patch
PHKL_24554 vPar enablement, spinlock patch
PHKL_25652 thread nostop for NFS, rlimit max value

PHKL_28122 signals,threads enhancement,Psets Enablement
PHKL_28474 signal cumulative patch
PHKL_29243 vPar enablement, cumulative patch
PHKL_29704 Psets Enablement, SCHED_NOAGE, FSS
PHKL_30034 Psets Enablement Patch; FSS cap
PHKL_30105 remove mem module and LPMC syslog msgs
PHKL_30398 KI FSS ID and KI_rfscall
PHKL_30607
lpq,KRS,DU MP,LVM,VM,DaS,IF
PHKL_32002 physio thread performance degradation
PHKL_32668 vPar enablement,DLKM load panic
PHKL_33408 RTSCHED performance enablement patch
PHKL_33436 select_enh tunable;Buffer Cache Perf
PHKL_34100 pstat data page fault,new STREAMS functions
PHKL_34173 select(2) delay, hang
PHKL_34309
,pset,slpq ,fss,lwp,cleanpt
PHKL_34311 thread abrt,suspend,DaS,physio,cleanpt
PHKL_34548 vPars panic;Syscall
m_lock
PHKL_34805 JFS3.3 patch; mmap
PHKL_34926 Buffer cache performance improvement patch
PHKL_34986 LVM Cumulative Patch; LVM OLR; SLVM 16

PHKL_35050 vPar enablement patch with kwdb support
PHKL_35091 SPP fragmentation;AIO;EVP;ufalloc;dup2

PHKL_35281 Core PM,vPar,Pset,slpq,FSS,rtprio,cleanpt
PHKL_35282 clock sync err, invalid gethrtime val
PHKL_35399 vPar cumulative patch
PHKL_35421 Ioscan/INTRMIGR/ioconfig cumulative patch
PHKL_35422 GIO Cumulative Patch
PHKL_35564 mmap(2) fails with ENOMEM, VM vfork(2) fix
PHKL_35693 netdiag1 MP-driver and default nproc
PHKL_35795 VM vPar Fix for no equivalently mapped

PHNE_28349 rbootd(1M) cumulative patch
PHNE_30425 elm patch
PHNE_34777 Cumulative STREAMS Patch
PHNE_34988 J2793B X.25 SX25-HPerf/SYNC-WAN
PHNE_35183 cumulative ARPA Transport patch
PHNE_35418 ONC/NFS General Release/Performance Patch
PHNE_35484 sendmail(1M) 8.9.3 patch
PHSS_32977 Xserver cumulative patch
PHSS_35249 CDE Base Periodic Patch
PHSS_35379 ld(1) and linker tools cumulative patch
PHSS_35434 CDE Applications Patch
PHSS_35711 X/Motif Runtime Periodic Patch

[Fabian Briseño]

Hello again Fauziah.

Follow dennis advice try
ctrl+shift+|

[Fauziah Mahdan]

before what what will happened if it passed the SNMP service?The SNMP service wont startup?
Then what is the impact?
No network to this server?
pls reply


Fauziah

[Fabian Briseño]

Check this link out.


http://forums1.itrc.hp.com/service/forums/questionanswer.do?threadId=1076130

[Fauziah Mahdan]

anyway it still didn't work.
Still hanging