Authentication failure sw_cli

[eduardocalfaia]

Hi all,

I have changed the 3paradm password and now I am getting these alerts:

017-03-24 17:56:22 CET 0 Informational Authentication failure sw_cli { 127.127.0.1 3996} {Authentication failure, reason: Invalid user (3paradm) or password} {}
2017-03-24 17:56:24 CET 0 Informational Authentication failure sw_cli { 127.127.0.1 3999} {Authentication failure, reason: Invalid user (3paradm) or password} {}
2017-03-24 17:56:27 CET 0 Informational Authentication failure sw_cli { 127.127.0.1 4006} {Authentication failure, reason: Invalid user (3paradm) or password} {}
2017-03-24 17:56:29 CET 0 Informational Authentication failure sw_cli { 127.127.0.1 4009} {Authentication failure, reason: Invalid user (3paradm) or password} {}
2017-03-24 17:56:32 CET 0 Informational Authentication failure sw_cli { 127.127.0.1 4016} {Authentication failure, reason: Invalid user (3paradm) or password} {}
2017-03-24 17:56:34 CET 0 Informational Authentication failure sw_cli { 127.127.0.1 4019} {Authentication failure, reason: Invalid user (3paradm) or password} {}

I don't know what the ip 127.127.0.1 is, has anynone already gotten this error?

Thanks

[Dennis Handly]

Are you using WSAPI?

127.127.0.1 is the IP address of node0.  You might see these internode IP addresses if using tasks or WSAPI.