HPE Community
HPE BladeSystem
HPE BladeSystem
Have questions about BladeSystems? Find answers, share knowledge, and discuss solutions in this HPE Community forum.
1839971 Members
2162 Online
110158 Solutions
New Discussion

Join the conversation with experts and colleagues

Register with HPE Community
Attach multiple iso file on ILO (HP ProLiant DL360 Gen10)
Elisams
09-26-2025
Posted to:
BladeSystem - General
Original author:
Elisams
Hello, Is there a way to attach 2 iso file from the ILO? It seems I can't but wanna make sure.. I'm doing this because I try to install ubnutu iso with a cloud-init seed iso. Thank you !
VCM-OA communication down
NNag1
09-23-2025
Posted to:
BladeSystem - General
Original author:
NNag1
Hello, I have an HPE c7000 Blade System with two HP VC FlexFabric-20/40 F8 Modules. Issue: Every 9 days, the Virtual Connect Manager becomes unavailable for a few minutes. In the Virtual Connect Log, the following notes appear: VCM-OA communication d...
BladeServer C3000 OnboardAdministrator keeps disabling login
pyxfluff
09-15-2025
Posted to:
BladeSystem - General
Original author:
pyxfluff
Hello, Recently we started using a HP BladeServer C3000 with the Onboard Administrator module. However, every few days, the `Administrator` account is disabled and all other user accounts are shut off as well.The Onboard Administrator firmware is 4.9...
replacement procedure for Oneview managed Flex 10 / flex 10D Virtual connect module
AndrewR2
09-09-2025
Posted to:
BladeSystem - General
Original author:
AndrewR2
Afternon all. I have a C700o chassis rnning several production critical bl460Cgen 9's. It has 2 flex 10 / Flex10d VC modules and the module in Bay 1 is failed with all links down. VCSU health check had the folloowing output : (22220)[VcsuCore.cpp:593...
Synergy chassis firmware update
KWSanjana
08-14-2025
Posted to:
BladeSystem - General
Original author:
KWSanjana
I have a question regarding the Synergy chassis firmware update. If we update the chassis firmware, will the blade servers also go down or reboot?
Non disruptive removal of uplink sets from C7000 virtual connect
AndrewR2
06-03-2025
Posted to:
BladeSystem - General
Original author:
AndrewR2
Good morning all. I currentlly have 2 C7000 chassis that have 2 incorrect uplink sets configured on interface3 X3 of the dual HP VC Flex-10 Enet Module interconnects in Bay 1 & 2 of the enclosures. I would like to remove the inocrrect uplink sets...
Re: BL460c Gen with V2 Intel CPUs can't see 534FLB's HBA?
Kumi Chetty
12-04-2013
Posted to:
BladeSystem - General
Original author:
MattGG
Hi Matt Had the same problem with Proliant BL660c gen 8, we tried almost everything we could think off, no success. Elevated the call to Level 2 engineering and they were taking very long to resolve. So we decided to apply some classical troubleshoot...
replacement procedure for Oneview managed Flex 10 / flex 10D Virtual connect module
AndrewR2
09-09-2025
Posted to:
BladeSystem - General
Original author:
AndrewR2
Afternon all. I have a C700o chassis rnning several production critical bl460Cgen 9's. It has 2 flex 10 / Flex10d VC modules and the module in Bay 1 is failed with all links down. VCSU health check had the folloowing output : (22220)[VcsuCore.cpp:593...
Re: Smart Update Firmware DVD 2013 edition
TVVJ
12-05-2013
Posted to:
BladeSystem - General
Original author:
sureshs
Firmware DVD 10.10 (4 Jun 2012) is the final version. HP Service Pack for ProLiant (SPP) has replaced it. Click here to download SPP . Regards, Vijayasarathy
  • Legend
  • New MessagesNew Messages
  • No New Messages No New Messages
  • Hot TopicHot Topic
  • Replied-to Thread Replied-to Topic
  • Read Only ThreadRead-Only Topic
Top Solution Authors Last 30 Days
View All
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.