Entry Storage Systems
Entry Storage Systems
Find answers to your questions about HPE Entry Data Storage Systems in this forum.
1853281 Members
2078 Online
104085 Solutions
New Discussion

Join the conversation with experts and colleagues

Posted to:
Original author:
Hello everyone, I hope you can help me. I’ve tried to perform a firmware update on my MSA2052 for both the controllers and the storage devices. According to the MSAHealthCheck report, and the complete lack of maintenance by my predecessor... Unfortun...
Posted to:
Original author:
Could you please provide guidance on how to set up replication between an FC storage system at our primary site and an iSCSI storage system at our DR site? Both storage units are MSA Gen 7 models. I would appreciate any advice or documentation you ca...
Posted to:
Original author:
Hello, We are experiencing an issue with an HPE MSA 2050 storage array where the disk group remains in QTOF (Quarantined Offline) state after a controller failure. Below are the full details of the problem and the troubleshooting steps already perfor...
Posted to:
Original author:
At a customer we run a MSA 2060 SAS storage, there are three Debian/Proxmox nodes connected via FC and there is one LUN on a RAID-5-array. That LUN was formatted with OCFS2. From the view of the nodes the 7 TB LUN is only filled to around 50%. On the...
Posted to:
Original author:
Hello, We have a storage system equipped with 16 x 3.3TB SSDs and 2 x Fibre Channel controllers. Each controller is connected to two SAN switches via 4 Fibre Channel ports. Four ESXi hosts access the storage system via the SAN switches, each with one...
Posted to:
Original author:
Can anyone help me on ldap user auth configuration for MSA2060 FC? I followed a web guideline but no luck. Guide (pg 85): https://support.hpe.com/hpesc/public/docDisplay?docId=a00128580en_us&docLocale=en_US Thanks in advance.
Posted to:
Original author:
@ePicNet The instruction previous is incorrect. Replacing drives in an MSA 2050 (Gen5) disk group with larger drives will not change disk-group usable capacity. The Gen5 MSA uses only traditional RAID sets (RAID 1, 10, 5 and 6) which determine a mini...
Posted to:
Original author:
Hello @Vladimir90 , That's excellent! We are extremely glad to know your concern has been addressed.
Posted to:
Original author:
System recommended content: 1. HPE MSA Firmware Release Notes for MSA 1050 (VE270P007) and MSA 2050/2052 (VL270P007) | Issues and workarounds 2. HPE MSA Firmware Release Notes for MSA 1050 (VE270P008) and MSA 2050/2052 (VL270P008) | Issues and workar...
  • Legend
  • New MessagesNew Messages
  • No New Messages No New Messages
  • Hot TopicHot Topic
  • Replied-to Thread Replied-to Topic
  • Read Only ThreadRead-Only Topic