Storage Boards Cleanup
To make it easier to find information about HPE Storage products and solutions, we are doing spring cleaning. This includes consolidation of some older boards, and a simpler structure that more accurately reflects how people use HPE Storage.
3PAR StoreServ Storage
cancel
Showing results for 
Search instead for 
Did you mean: 

Changing proxy and DNS IP Addresses for 3PAR SPOCC

Emad Omar
Regular Advisor

Changing proxy and DNS IP Addresses for 3PAR SPOCC

We are looking to change the IP Addresses of proxy and DNS and this could affect the heartbeat from Service Processor to HP. Please provide needed steps to modify these ip addresses; in order to keep H.B. from our service processor.

6 REPLIES
Sheldon Smith
Honored Contributor

Re: Changing proxy and DNS IP Addresses for 3PAR SPOCC

See the HP 3PAR Service Processor Software User Guide  - Changing the Public Network Interface Parameters
http://h20566.www2.hpe.com/hpsc/doc/public/display?docId=emr_na-c02982065

 

Note: While I work for Hewlett-Packard, all of my comments (whether noted or not), are my own and are not any official representation of the company.

----------

If my post was useful, click on my KUDOS! thumb below!

 


Note: While I work for Hewlett Packard Enterprise, all of my comments (whether noted or not), are my own and are not any official representation of the company.
----------
If my post was useful, click on my KUDOS! thumb below!
Emad Omar
Regular Advisor

Re: Changing proxy and DNS IP Addresses for 3PAR SPOCC

 

Hi Smith,

 

Thank you for your help.

In fact I'm still cannot modify the DNS ip address. Provided document has not details on modifying this ip address.

Appreciating if someone help .

 

BR,

Emad Omar

Sheldon Smith
Honored Contributor

Re: Changing proxy and DNS IP Addresses for 3PAR SPOCC

Sorry, misread your question.

 

Try this. Browse to your Service Processor, log in to SPOCC.

 

From the HP 3PAR Service Processor Onsite Customer Care (SPOCC) User Guide:
1. In the left navigation pane, click SPmaint.
2. Click Network Configuration.
3. Click DNS Configuration

 

 

Note: While I work for Hewlett-Packard, all of my comments (whether noted or not), are my own and are not any official representation of the company.

----------

If my post was useful, click on my KUDOS! thumb below!

 


Note: While I work for Hewlett Packard Enterprise, all of my comments (whether noted or not), are my own and are not any official representation of the company.
----------
If my post was useful, click on my KUDOS! thumb below!
frinku_hp
Occasional Advisor

Re: Changing proxy and DNS IP Addresses for 3PAR SPOCC

One thing I noticed is to change the proxy you must use cpmaint user acccount and password is held by HP I think.

Emad Omar
Regular Advisor

Re: Changing proxy and DNS IP Addresses for 3PAR SPOCC

Hi, Yes, you are correct. Changing proxy must be done using cpmaint user acccount and password held by HP. This is the problem. We need to modify this as we are facing different issues on DNS and proxy and most of times need to modify these parameters to allow HP receiving the heartbeat from SP. It is not a logic to call HP everytime to connect remotely to modify these value. Please advise.
Torsten.
Acclaimed Contributor

Re: Changing proxy and DNS IP Addresses for 3PAR SPOCC

I thought 3parcust can add/delete DNS  too?

 

I usually leave DNS blank, it is not really needed.

 

The heartbeat doesn't need DNS.


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!