BladeSystem - General
1745830 Members
3912 Online
108723 Solutions
New Discussion

Blade switch configuration

 
sgeorge111_1
New Member

Blade switch configuration

Hello,
I am new to HP blade switch configuration, I understand interfaces from gi 0/17 through gi 0/24 for uplink connection. How other interfaces in the blade switch like gi 0/1 through gi 0/16 are mapped to? The default configuration of the blade switch is
interface GigabitEthernet0/1
speed 1000
spanning-tree portfast
1 REPLY 1
Blazhev_1
Honored Contributor

Re: Blade switch configuration

hi,

I assume you have the cisco 3020 switch...

0-16 are the downlink ports to the blades.
The midplane routes the blade NICs to these ports(this is true for all other ethernet blade switches also).