Simpler Navigation for Servers and Operating Systems
Completed: a much simpler Servers and Operating Systems section of the Community. We combined many of the older boards, so you won't have to click through so many levels to get at the information you need. Check the consolidated boards here as many sub-forums are now single boards.
BladeSystem Server Blades
cancel
Showing results for 
Search instead for 
Did you mean: 

BL465 Servers G7, boot from SAN errors when installing Windows 2083 R2 disks 3PAR

SOLVED
Go to solution
JuanCG
Super Advisor

BL465 Servers G7, boot from SAN errors when installing Windows 2083 R2 disks 3PAR

Hi all, I have a c7000 chassis with Virtual Connect Flex-10, version 3.30.
OA version 3.32.

The server model is BL465 G7

I am trying to install Windows 2008 R2 with boot from SAN from HP 3PAR disks in a F200, but fails and shows this error:

Windows can not be installed in the selected location. Error: 0x80300001

The BIOS of the Blades is:

BIOS - System ROM - 2011.12.10 (A) (20 Jan 2012)-SP55851

The Emulex HBA Driver
4.0.360.15a


When I load the installation of Windows 2008 R2
Driver - Storage Fibre Channel - 2.50.007 (November 13, 2011)-250007_FCoE_x64_cp015852

When I load the driver, the installation of Windows sees all paths to disk, but when I select to install it gives me the error above.


With the same servers but I have no problem installing VMware.


regards

2 REPLIES
S_Logan
HPE Pro
Solution

Re: BL465 Servers G7, boot from SAN errors when installing Windows 2083 R2 disks 3PAR

Hi Juan,

 

Please refer this article:

http://www.exchangemaster.net/index.php?option=com_content&task=view&id=134&Itemid=1&lang=en

 

HTH,

Surendar

I work for HPE

If you feel this solution was helpful please click the KUDOS! thumb below!
JuanCG
Super Advisor

Re: BL465 Servers G7, boot from SAN errors when installing Windows 2083 R2 disks 3PAR

Hi Surendar, thank you very much for answering, I solved this yesterday by telling me the link.

thank you very much