1748181 Members
3302 Online
108759 Solutions
New Discussion

Re: Aggregate Test

 
fouji
Occasional Contributor

Aggregate Test

Hi,

We have a ComWare Switches, configured with aggregate links.

I would like know how test the aggregate speed and as bandwidth and the same for each link  ? please

 

Thank you

 

Bonjour,

 

Nous avons des switchs sous ComWare avec des liens en agrégats.

J'aimerais savoir comment faire pour tester le vitesse ainsi que la bande passante utilisé de l'aggrégat, et de même pour chaque liens ?

 

En vous en remerciant.

 

1 REPLY 1
parnassus
Honored Contributor

Re: Aggregate Test

Testing how performant is going to be the load balancing provided that your LACP implementation depends mainly on LACP Hashing Algorithm used (L2 versus L3 versus L4) and also depends on the type of outgoing data traffic seen by the LACP interface (so the outbound traffic that is going to exit the LACP interface).

There are scenarios where LACP is not so performat even if it is still able to grant resiliency against link/port/module/chassis failure...

A test tool would be iperf but you need to plan exactly how to test (and what to test).


I'm not an HPE Employee
Kudos and Accepted Solution banner