Comware Based

Re: OSPF import-route direct not working when using vpn-instance

 
SOLVED
Go to solution
drc290
Occasional Visitor

OSPF import-route direct not working when using vpn-instance

Hi All

I am using some 5820X 24XG SFP+ (JC102A) running OSPF with multiple vpn-instances. I have some trouple with the import-route direct command, it works fine for the OSPF instance running without a vpn-instance, but for the other OSPF instances running a vpn-instance it wont import the routes and i need to configure the networks manually.  

I have tried searching but can't seem to find any answers, so I hope that you can help me :) 

Best regards

Danny

4 REPLIES 4
NIKS55
Occasional Advisor
Solution

Re: OSPF import-route direct not working when using vpn-instance

Hello Danny,

Good day!

Can you check below community post.

https://support.hpe.com/hpsc/doc/public/display?docId=mmr_sf-EN_US000005304

I believe to allow external routes in ospf database we need to add command "vpn-instance-capability simple "

Thanks!

I am an HPE Employee

 

 


I am a HPE Employee
drc290
Occasional Visitor

Re: OSPF import-route direct not working when using vpn-instance

Hello

Thanks alot for the reply :) 

I will test it later today 

drc290
Occasional Visitor

Re: OSPF import-route direct not working when using vpn-instance

I am happy to inform that it works now. Thanks alot.

saaud93
New Member

Re: OSPF import-route direct not working when using vpn-instance

I'm using HP Comware 7 and using ospf version 2 under multiple vpn-instance. 

For one vpn-instance named MPP,  the ospf routes are not reflecting under my vpn-instance routing table MPP.

I can see these ospf routes in my ospf database table using the "dispaly ospf lsdb"

Why is that some ospf routes are reflectinf and some are not under my vpn-instance routing table MPP?

Will adding the command "vpn-instance-capability simple" under my ospf fix this issue?