Upgrade ISSU

[spag]

Hi,

I have problem with a 4x 5800 IRF stack.

I want upgrade this stack with ISSU procedure for imcompatible firmware. But without success.

And i want upgrade again without ISSU, just the classic procedure with reboot all. But i have this error:

%Jul 10 17:31:06:963 2015 HP ISSU/3/SLAVE IMAGE ERR:

Error: The current boot file running on slave is not the specified boot file.

[HP]dis issu state

ISSU state: Load

Compatibility: Incompatible

Work State: Normal

Upgrade Method: Board by board

Previous version:   R1808P22

Previous boot file is flash:/a5800_5820x-cmw520-r1808p22.bin

Upgrade version: R1809P09

Upgrade boot file is flash:/A5800_5820X-CMW520-R1809P09.bin

HOW i can disable the ISSU procedure under the member 3 without reboot all stack, for return in default state: "ISSU state: Init"

I have a second problem when i upgrade the bootrom of member:

<HP>bootrom update file A5800_5820X-CMW520-R1809P09.bin slot 1

This command will update bootrom file on the specified board(s), Continue? [Y/N]:y

Now updating bootrom, please wait...

Extend BootRom Version is not equal,updating? [Y/N]y

Basic BootRom Version is not equal,updating? [Y/N]y

<HP>bootrom update file A5800_5820X-CMW520-R1809P09.bin slot 3

This command will update bootrom file on the specified board(s), Continue? [Y/N]:y

Now updating bootrom, please wait...

Failed to update bootrom of Board 3.

<HP>bootrom update file A5800_5820X-CMW520-R1809P09.bin slot 2

This command will update bootrom file on the specified board(s), Continue? [Y/N]:y

Now updating bootrom, please wait...

Failed to update bootrom of Board 2.

What it's fail for member 2 and 3?

Thanks a lot, i very important and urgent.

[Sietze Reitsma]

There is a good blog from Peter Debruyne about this subject.

http://abouthpnetworking.com/2014/03/24/comware5-issu-incompatible/

http://abouthpnetworking.com/2014/03/24/comware5-issu-unkown-manual-procedure/