Email Subscription Notifications Suspended Temporarily
We are in the process of making navigation in the Servers and Operating Systems forums simpler and more direct. While doing this, we have to temporarily suspend email notifications for subscriptions. If you are subscribed to one or more discussion boards or blogs in the community, please check them daily to see new content. Notifications will be turned back on in a few days. We apologize for any inconvenience this may cause. Thanks, Warren_Admin
Disk Enclosures
cancel
Showing results for 
Search instead for 
Did you mean: 

Configuring additional logical drives

Ayman Altounji
Valued Contributor

Configuring additional logical drives

I don't know the SCSI ID and logical unit number (LUN) to configure my additional logical drives through "mkdev hd", after configuring them using SmartStart.
1 REPLY
Ayman Altounji
Valued Contributor

Re: Configuring additional logical drives

You must first create the logical array volume using the Compaq array configuration utility. When the "ida" driver was installed into the OS, all the device nodes were created for the logical drives, so you do not need to use the "mkdev hd" command. Just use the "mkdev fs" command with the correct device name for the logical drive.