FC10 array : new archtecture

[malki_3]

I need to setup a new configuration for tow server that share 4 FC10.
I need more information abouth capacity and connction for FC10..
Can someone help me
Thanks

[Eugeny Brychkov]

FC10 work in FC-AL only. Disk addresses can be changes with switch at the LCCs. Do not forget switches should be setup the same at both LCCs within one FC10. Number of AL-PAs occupied by FC10 is 12 (you can set them up using step 12: alpa=switch*12+slot#, for LCC alpa=switch*12+10, slot#=0..9). You can not connect both LCCs to one arbitrated loop because then you'll have alpa conflicts (same alpas seen from both LCCs)
Please refer to user's manual for more/detailed info
Eugeny