HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
Disk Enclosures
cancel
Showing results for 
Search instead for 
Did you mean: 

MSA2000 mapping issue when adding second volume

 
kent ehrman
Occasional Contributor

MSA2000 mapping issue when adding second volume

Have a RX2660 and MSA2000 with a 4-member raid5.
Create the first volume OK, VMS see the OK.
Create the next volume and I get the following message.
Unable to create volume vdisk1_v002.
Mapping(s) were not added. The command may have partially succeeded. (vdisk1_v002) - The volume(s) were not mapped successfully.

Any ideas?
1 REPLY
Venkadesh Kannan
Frequent Advisor

Re: MSA2000 mapping issue when adding second volume

with the error, I assume it is G2/G3. Please update to latest firmware M111R06-04/TS201R014. A lot of fixes are present there which includes mapping problems as well