Disk Enclosures
cancel
Showing results for 
Search instead for 
Did you mean: 

Replacing battery Pack Smart Array 641/642 Controller

mzv
Occasional Visitor

Replacing battery Pack Smart Array 641/642 Controller

Hello.

 

We have HP StorageWorks 20 Modular Smart Array in which, through hpacucli we saw message about failed battery:

 

MSA20 in E058MLJ1B1
   Bus Interface: SCSI
   Serial Number: XXXXXXXXXX 
   Chassis Serial Number: XXXXXXXXXX

[@mzv - For your security, I have removed the serial number from your post above - that's information you probably don't want to make publicly available.]
   Chassis Name: E058MLJ1B1
   RAID 6 (ADG) Status: Enabled
   Controller Status: OK
   Chassis Slot: 2
   Hardware Revision: Rev A
   Firmware Version: 2.06
   Cache Board Present: True
   Cache Status: Temporarily Disabled
   Drive Write Cache: Enabled
   Total Cache Size: 112 MB
   No-Battery Write Cache: Disabled
   Chassis Slot 2 Battery Info
      Cache Backup Power Source: Batteries
      Battery/Capacitor Count: 2
      Battery/Capacitor Status: Failed (Replace Batteries)
      Failed Battery Location: Battery 1
      Failed Battery Location: Battery 2
   Host Bus Adapter Slot: 4
   Host Bus Adapter Port: 1
   SATA NCQ Supported: False

 

We bought battery pack HP 274779-001 (307132-001) 3.6V 500mAh Ni-MH Battery Pack for Smart Array 641/642 Controller and inserted it into controller, but we also have error message.

what I'm doing wrong

Thanks!

 

 

1 REPLY
PGTRI
Honored Contributor

Re: Replacing battery Pack Smart Array 641/642 Controller

hi,

 

I seems , that the both batteries are defect ( in the msa 20 ).  This modell has two different batteries .

 

307132-001 – battery (MSA Battery #1)
349799-001 – battery plus holder kit (MSA Battery #2)

 

You can check the following hp doc .

 

http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&taskId=110&prodSeriesId=415598&prodTypeId=12169&objectID=c00810278

 

regards,

 

 

 

How to Say Thank You? Just click the KUDOS!