HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
Disk Enclosures
Showing results for 
Search instead for 
Did you mean: 

replace controller and drives

Ayman Altounji
Valued Contributor

replace controller and drives

Running a Proliant 7000, netware 5.1, smart-2/p, 5 x 9.1gig, raid5, one logical drive. 1 config partition, 1 dos partition, 1 netware partition. Have purchased a smart-4200 and 4 x 36gigs. I want to transfer entire file system from old to new array and then pull old controller and drives for use elsewhere. Looking for ways to do this without the backup & restore method. Already have new controller & drives installed and running along with old hardware. Already set up new drives as one logical drive. Now what?
Ayman Altounji
Valued Contributor

Re: replace controller and drives

You can use ServerMagic from Powerquest (www.powerquest.com).
Whit ServerMagic you can copy and resize volumes and partions.