cancel
Showing results for 
Search instead for 
Did you mean: 

Attempting to abort cmd

Kenneth Wind
Advisor

Attempting to abort cmd

Hi

One of my servers keep sending following in the console port:

scsi1:0:1:0: Attempting to abort cmd f7430e00: 0x2a 0x0 0x0 0x68 0x0 0x57 0x0 0x0 0x8 0x0
scsi1:0:1:0: Command not found
scsi1:0:1:0: Attempting to abort cmd f7430a00: 0x2a 0x0 0x0 0x88 0x0 0x57 0x0 0x0 0x8 0x0
scsi1:0:1:0: Command not found

Does anyone know what this means?.


6 REPLIES
Steven E. Protter
Exalted Contributor

Re: Attempting to abort cmd

Shalom,

No idea what it means.

It would be helpful to know the OS, hardware model number, what log file the message appears in.

Seems to have something to do with i/o or scsi.

More information increases the chances of getting useful help from these forums.

SEP
Steven E Protter
Owner of ISN Corporation
http://isnamerica.com
http://hpuxconsulting.com
Sponsor: http://hpux.ws
Twitter: http://twitter.com/hpuxlinux
Founder http://newdatacloud.com
Ivan Ferreira
Honored Contributor

Re: Attempting to abort cmd

The output of dmesg and cat /proc/scsi/scsi
would help.

Por que hacerlo dificil si es posible hacerlo facil? - Why do it the hard way, when you can do it the easy way?
Kenneth Wind
Advisor

Re: Attempting to abort cmd

Here is the scsi output :

cat /proc/scsi/scsi

Attached devices:
Host: scsi1 Channel: 00 Id: 00 Lun: 00
Vendor: HP 73.4G Model: ST373455LC Rev: HPC8
Type: Direct-Access ANSI SCSI revision: 03
Host: scsi1 Channel: 00 Id: 01 Lun: 00
Vendor: HP 73.4G Model: ST373455LC Rev: HPC8
Type: Direct-Access ANSI SCSI revision: 03
Host: scsi1 Channel: 00 Id: 06 Lun: 00
Vendor: ESG-TSD Model: SCA HSBP M23 Rev: 1.06
Type: Processor ANSI SCSI revision: 02

It's a seagate HD that has been installed.
Ivan Ferreira
Honored Contributor

Re: Attempting to abort cmd

Maybe the second this listed is about to fail.
Por que hacerlo dificil si es posible hacerlo facil? - Why do it the hard way, when you can do it the easy way?
Kenneth Wind
Advisor

Re: Attempting to abort cmd

Do you have any idea if it's possible to make a disk diagnostic, to see if that can clean up any disk errors?
Kenneth Wind
Advisor

Re: Attempting to abort cmd

Do you know how I can get the SCSI controller HW version, and where at HP's web page, drivers for HP cc3310 can be found?.

BR.
Kenneth.