Simpler Navigation coming for Servers and Operating Systems
Coming soon: a much simpler Servers and Operating Systems section of the Community. We will combine many of the older boards, and you won't have to click through so many levels to get at the information you need. If you are looking for an older board and do not find it, check the consolidated boards, as the posts are still there.
General
cancel
Showing results for 
Search instead for 
Did you mean: 

Blade Configuration Tool

Chrisb_6
Occasional Visitor

Blade Configuration Tool

Hi,

I am in the process a putting together a Design Proposal Solution. Is there an HP configuration tool for Blades that graphicly shows the back on a c7000 enclosure and the front of the c7000 enclosure where you can pick and choose your components that will be installed?
1 REPLY
Adrian Clint
Honored Contributor

Re: Blade Configuration Tool

There are tools where you choose the specification and it shows you a BOM and front & back views.
http://h71028.www7.hp.com/enterprise/cache/80364-0-0-0-121.html

Or you can use Visio shapes
http://www.visiocafe.com/hp.htm
Pick the HP-Blades zip and unzip it into Visio's My Shapes folder and then pick the c-c-class group.