cancel
Showing results for 
Search instead for 
Did you mean: 

EMC ECC processes

 
Highlighted
John Guster
Trusted Contributor

EMC ECC processes

Does anyone see many entries(more than 60 entries)of ECC's mhragent process attached in the shared memory region and marked as D-rw------- Wonder why?
4 REPLIES 4
Rita C Workman
Honored Contributor

Re: EMC ECC processes

I'm not 100% sure what your seeing.

On my HPUX box the mhgragent process only shows as one entry (ps -ef | grep ecc)

I check what semaphores it's holding on to with (ipcs -a | grep 0x45), since 0x45 is the address that ECC processes map to. It shows about 6 entries for this shop, not 60.

And the D-rw----- looks like file permissions, whereas in checking memory using ipcs it reflects --ra-ra-ra-.

Don't know if this helped, but it sounds to me like maybe other things are kicked off, or old processes maybe are left over.

Rgrds,
Rita
Highlighted
Dennis Handly
Acclaimed Contributor

Re: EMC ECC processes

I don't know why there are 60 but the "D" means the segment is marked for deletion, after all 60 die.

>Rita: And the D-rw----- looks like file permissions,

Yes where the "D" is special.
Highlighted
Turgay Cavdar
Honored Contributor

Re: EMC ECC processes

It is the behaviour of EMC CC 6.1. Checkout the following thread:


http://forums13.itrc.hp.com/service/forums/questionanswer.do?threadId=1355443
Highlighted
John Guster
Trusted Contributor

Re: EMC ECC processes

How can EMC let ecc 6.1 out?
Thanks for the info.