HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
Showing results for 
Search instead for 
Did you mean: 

dtc terminal display

Occasional Visitor

dtc terminal display

we are using dtc16 with a L1000 HPUX 11.0 and 700/60 Terminals. On the terminals, the screen display is split into 2 parts; upper-part - pause 2 seconds - lower part. (if a relevant part if the screen content is modified).

the terminals are connected directly to the dtc, this to the L1000. there should be a parameter to allow screen display without pausing; but which one? grateful for any ideas

Laurent Menase
Honored Contributor

Re: dtc terminal display

I think you may try to play with -z and -s option of telnetd.