Simpler Navigation coming for Servers and Operating Systems
Coming soon: a much simpler Servers and Operating Systems section of the Community. We will combine many of the older boards, and you won't have to click through so many levels to get at the information you need. If you are looking for an older board and do not find it, check the consolidated boards, as the posts are still there.
General
cancel
Showing results for 
Search instead for 
Did you mean: 

problem with creating volume group in LVM

anat heilper
Frequent Advisor

problem with creating volume group in LVM

Hi,
I've configured a volume group vgsg02:
which is shared on 2 servers( it will be a part of a package of linux serviceguard),
and I have this repeating problem:
every time that I do a reboot, the volume group configuration is not ok.
the scenario is the following:
if I issue the command ( the vg is vgsg02
vgdisplay | grep -w -e vgsg02 | wc -l
I get the value of 0
the second time I issue the command, the value will be 1.
what can cause that?

1 REPLY
Steven E. Protter
Exalted Contributor

Re: problem with creating volume group in LVM

Shalom,

I had this very same problem.

http://forums11.itrc.hp.com/service/forums/questionanswer.do?threadId=1152473

There are two solutions in the thread, either of which will work.

SEP
Steven E Protter
Owner of ISN Corporation
http://isnamerica.com
http://hpuxconsulting.com
Sponsor: http://hpux.ws
Twitter: http://twitter.com/hpuxlinux
Founder http://newdatacloud.com