HPE EVA Storage
1748125 Members
3197 Online
108758 Solutions
New Discussion

Creating device in SPMGR with same LUN information.

 
Gary Betts
Occasional Contributor

Creating device in SPMGR with same LUN information.

Hi,

I have a device I wish to add to spmgr but it needs to be created with the same LUN / device.

The disk is assigned to two servers from an EVA3000 using the same LUN.

Currently configured on serverA as:

TGT/LUN Device WWLUN_ID H/W_Path #_Paths
2/ 1 c10t2d1 6005-08B4-0010-12DE-0000-C000-000A-0000 4

But when I add this on ServerB using the WWLUNID I cannot get the same device TGT/LUN to be assigned.

I am aware of the spmgr add wwwlunid [target lun] command but I have been unable to find an example of the syntax for [target lun] and despite guessing the format I have had little success.

Any advice would be appreciated.

Regards
Gary